Results 1 to 5 of 5
  1. #1
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    27,757

    Default Eave repairs project

    A couple of roof eave panels had fallen off Grandmas house so my nephew (Steve 6'6" and 120+kgs)) and I had a crack at replacing them. The main problem was the panels were missing from a second storey section of the house that was fortunately over a concrete driveway so the plan was Steve and I would hire a Scissor lift. However, the two of us were too heavy for the scissor lift to get off the ground so I sent Steve up to do the high work and I supervised. I had prepared those T-pieces of timber clamped to the sides of the lift cage. This made it a bit easier especially as only one of us could go up at a time.

    EANQ6974.jpg

    One really irritating thing was the new bits just made the rest look a bit shabby.
    IOHV2311p.jpg

    One small loose section over a garden on the other side of the house could not be accessed with the scissor lift but fortunately an extra long ladder borrowed from the mens shed was long enough.
    IOKJ5820p.jpg

    This is the first "real project" work I've undertaken since recovering from a broken ankle and I was really happy with the way I pulled up after it,


  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    May 2011
    Location
    Albury
    Posts
    3,019

    Default

    Amazing how well we brush up as we get older, especially if we haven't done anything.

    I reckon you made the right call on this one Bob.

  4. #3
    Join Date
    Aug 2007
    Location
    St Georges Basin
    Posts
    1,016

    Default

    Looks like a bit of water damage on that corner too Bob...

  5. #4
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    27,757

    Default

    Quote Originally Posted by burraboy View Post
    Looks like a bit of water damage on that corner too Bob...
    Yeah The Fremantle doctor and winter storms have driven rain up under the tiles and cause that problem also in other places inside the house.

    Many of the eave panels and some of the gutter facias need replacing.
    The gutter facias have badly warped outwards in places so the fibre board eaves that are supposed to slide into a side slot on the inside on the facia are no longer in their slot. These fibre board eaves are then held up buy just one or galv clouts per sheet and the wind rattles them loose. It's a rather crappy install by the builders IMHO.

  6. #5
    Join Date
    Jun 2003
    Location
    Sunbury, Vic
    Age
    84
    Posts
    2,713

    Default

    The older we get, the smarter we work.
    Tom

    "It's good enough" is low aim

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •