Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Garden shed design
-
7th October 2013, 05:10 PM #1
Garden shed design
Hello, reasonably experienced and capable DIY carpenter here with a question.
I am designing a garden building for Brisbane conditions as follows:
concrete slab with j- bolt anchors
5810 x 2840, walls 1.8
gable roof pitched at 30deg (12/7)
galvanised iron roofing
pine weatherboard ext cladding, nothing inside
1/3 shed, 1/3 open storage area.
Could someone advise the most economical pine stud wall design, ie timber dimension and spacing. The pine framed roof will have a small eave, probably make it standard ridge board and rafter design with collar ties and batons as i did this successfully for a gazebo with tiled roof.
I am guessing that 90x45 MGP10 T2 treated frame at 600 centres will be okay with rafters 150x35.
i have access to the AS design tables and will check these out as well.
My nail gun takes 3" nails, in case that affects anything.
cheers
duncan
Read the full thread at RenovateForum.com...
-
7th October 2013 05:10 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
design for old style slat & iron garden furniture
By deanne mudford in forum DESIGNS & PLANS FOR PROJECTSReplies: 0Last Post: 6th December 2008, 02:33 PM -
Garden Shed
By cranbrook2 in forum WOODWORK PICSReplies: 10Last Post: 30th April 2007, 10:28 AM