Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
Thread: Lazer light noisy
-
2nd January 2008, 02:30 PM #1
Member
- Join Date
- Jul 2006
- Location
- BEndigo
- Posts
- 62
Lazer light noisy
Hello GuysDoes anyone have any idea how to stop Lazer light (think it is Lazer light 2000) from making so much creaking noise - it is driving my batty?cheers.
-
2nd January 2008 02:30 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
2nd January 2008, 02:56 PM #2
Ilayem
- Join Date
- Nov 2007
- Location
- Orstralia
- Posts
- 456
-
2nd January 2008, 03:44 PM #3
Member
- Join Date
- Jul 2006
- Location
- BEndigo
- Posts
- 62
thxI didn't actually put it up - but looking from below looks like there is a 10ml ish hole drilled that the teck screw is in. Is that what you meen or are there special screws?cheers.
-
2nd January 2008, 04:17 PM #4
GOLD MEMBER
- Join Date
- May 2003
- Location
- Kuranda, paradise, North Qld
- Age
- 62
- Posts
- 5,639
The proper screws cut a clearance hole for the shank so that the sheet is free to move allowing for temperature induced expansion/contraction. They also have a largish neoprene washer to cover the hole.
Mick"If you need a machine today and don't buy it,
tomorrow you will have paid for it and not have it."
- Henry Ford 1938
-
2nd January 2008, 05:18 PM #5
Member
- Join Date
- Jul 2006
- Location
- BEndigo
- Posts
- 62
Yeah its got all that - wonder if the colourbond capping is doing anthing.A few people have told me that laser light just does this - nothing can be done about it - find that hard to belive.
-
2nd January 2008, 06:14 PM #6
Intermediate Member
- Join Date
- Apr 2004
- Location
- Parkdale Vic
- Age
- 72
- Posts
- 32
Tape for Lazer
I installed Lazer sheets and used the foam tape to put in the beams before screwing it on. You may be able to retrofit it if you back off the screws and insert a strip from below otherwise you would have to remove the sheets. One side is sticky. It can be found near where you buy Laser in a big hardware store.
It reduces the problem of creaking from thermal changes and wind.
Cheers
-
2nd January 2008, 09:22 PM #7
Member
- Join Date
- Oct 2007
- Location
- kingscliff nsw
- Age
- 68
- Posts
- 73
What he said
-
2nd January 2008, 10:57 PM #8
Super Moderator
Dodgy brother
- Join Date
- May 2004
- Location
- Pakenham, outer Melb SE suburb, Vic
- Age
- 55
- Posts
- 4,158
Similar Threads
-
How noisy is a dust extractor?
By contrebasse in forum WOODWORK - GENERALReplies: 5Last Post: 12th September 2007, 01:49 AM -
Noisy dust extractor
By Arron in forum DUST EXTRACTIONReplies: 7Last Post: 17th January 2004, 07:18 PM
