Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
13th April 2013, 01:40 AM #1
Packing out joists bearers - what to do?
Our floor has a fall of up to 30mm from highest to lowest. Worst point is 10mm across a door way. I have a 4t bottle jack, TP sleeper as a base support. My plan was to remove the tie, between bearer and stump, jack up the bearer and use FC sheeting to pack up the low points, then tie back to stump. Where the fall is in joist direction I'll lift the joist and pack between bearer and joist.
Does it matter if I'm packing bewteen bearer and stump or between bearer and joist?
Is FC sheeting ok or should I use nylon packers?
First time I've done this so any advice welcomed
Read the full thread at RenovateForum.com...
-
13th April 2013 01:40 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
Sleepers as bearers for decking
By Jeffpqld in forum WOODWORK - GENERALReplies: 7Last Post: 8th October 2010, 04:27 PM -
Attaching Bearers to Posts
By Dils in forum WOODWORK - GENERALReplies: 7Last Post: 13th October 2006, 10:08 PM