Bearer is bowing under the strain.....

**TEEJAY** · 2nd February 2007, 08:46 AM

Originally Posted by silentC

Another point: in modern building design, and I would have thought the same held true back then, the floor holds up the walls, not the other way around...

Some people get lucky and the panelling on the wall stiffens it like a bracing sheet and the wall supports itself. Being an old house it most likely has masonite or similar lining.

I know what you are saying and it doesn't comply with theory and regulations but it works this way all the same.

**journeyman Mick** · 2nd February 2007, 04:40 PM

Silent,
in some older construction styles the floor is held up by the walls. The house I grew up in in Sydney was double brick on sandstone strip footings. The floors were supported on the sandstone blocks that formed the base of the walls.

Mick

**silentC** · 2nd February 2007, 04:51 PM

Well, yeah but that's a different style of floor. This one is a platform floor with the walls sitting on the floor. I think the style you're talking about there is called a balloon frame? The walls go up first and then the floors are suspended between and there is a solid foundation under each wall.

**joe greiner** · 2nd February 2007, 10:47 PM

Yeah, that one threw me from the outset. How could removing the wall make the floor sag? Doesn't really matter, I guess. If sag correction is desired, lots of suggestions here.

Joe

Thread: Bearer is bowing under the strain.....

Thread Tools

Search Thread

Tags for this Thread

Posting Permissions