Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 4 of 4
  1. #1
    Join Date
    Oct 2005
    Location
    Melbourne
    Posts
    1

    Default Re-stumping ADVICE Needed

    I need some advice in relation to re-stumping. I am no handy man so please bare with me! I am currently looking at purchasing a property in the Dandenong Ranges in Melbourne. The house was built circa 1950 and is a fully renovated Weatherboard. I have had 2 x building inspections done and one has said it needs re-stumping and the other said it doesn't (and you wonder why I am confused). There was some damage to some bearers and joists (previous termite damage) which has now been repaired. I am now concerned about the stumps. One of the reports says that there is evidence of dry rot and failing to replace may result in major structural damage...

    I have 2 questions:
    1. What should I be looking for to establish if the stumps are OK or not OK?
    2. If it does need re-stumping what should I be expecting to pay? The house is on a steep block and access to some parts of the sub floor is limited.
    Appreciate any advice or things to be weary of.

    Many thanks

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Jan 2002
    Location
    Yinnar, Victoria, Australia
    Age
    66
    Posts
    1,277

    Default

    Jove.. welcome.
    One of the FIRST rules of this forum is "SEARCH".

    This subject has been discussed at length several times.

    If you type restumping into the board search tab you wil get a heap of previous threads on the topic.

    But just to help you on your way, go to your local council offices, and ask them for a list of qualified, licenced house re stumping companies.

    as for what you may be expected to fork out .. just over 18 months ago I paid $6000 to have all of the stumps in my home replaced.
    I try and do new things twice.. the first time to see if I can do it.. the second time to see if I like it
    Kev

  4. #3
    Join Date
    Jun 2004
    Location
    Bacchus Marsh VIC
    Posts
    36

    Default

    I also have a 1950's weatherboard house that I have recently had restumpped. Mine is about 12 sq's and cost about $4500. A few things to check out first;

    1. Are there any parts of the house that are appearing to sag, ie the stumps have sunk. You can quickly check this with a clear plastic hose water level. Pick a stump and compare it to other stumps around the outside of the house. I found some of mine were up to 40mm below the highest point.

    2. Inside the house, does the floor feel springy? Do items on shelves rattle as you walk past them etc.

    3. Some of my stumps looked perfect from the ground up, but digging 200mm or more into the ground showed that they had rotted away to nothing, where as the next stump along was fine all the way down to the sole plate.

    Even if you have none of the above, you may still need restumping. Best bet is to get professional advice.

    Grinner

  5. #4
    Join Date
    Sep 2004
    Location
    Strzelecki Ranges Victoria
    Posts
    395

    Default

    Grinners advice is sound.

    Dry rot in the stump area will generally be evident at or just below ground level & this can be checked by using a heavy pointed metal rod & / or clearing away the soil at the ground level of the stump. - in clay soils where the water can fill into the excavated stump hole and sit, it may be lower down. Typically, red gum stumps can be 'eaten away' to a certain extent without their structural integrity being compromised ( i didn't know how to say that easier) & this then becomes a 'judgement' call as to whether to replace the stump.
    You mention lack of access to some parts - is the dry rot in the bearers or joists due to lack of ventillation ??

    As to cost - restumpers will normally price for the overall job not per stump so I cant help
    Peter Clarkson

    www.ausdesign.com.au

    This information is intended to provide general information only.
    It does not purport to be a comprehensive advice.

Similar Threads

  1. Wood Carving tools + Wood Advice needed BAD
    By tiki in forum WOODWORK - GENERAL
    Replies: 8
    Last Post: 23rd July 2006, 09:51 PM
  2. Advice needed on combi-saw
    By wooded in forum HAND TOOLS - POWERED
    Replies: 6
    Last Post: 27th August 2005, 01:03 AM
  3. Woodcarving tool advice needed
    By Murel in forum WOODCARVING AND SCULPTURE
    Replies: 3
    Last Post: 22nd October 2004, 09:53 PM
  4. Advice on Saw/Router Needed
    By Ards in forum TRITON / GMC
    Replies: 6
    Last Post: 26th June 2004, 03:03 PM
  5. Advice needed
    By bass4Him in forum HAND TOOLS - POWERED
    Replies: 6
    Last Post: 23rd September 2003, 01:32 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •