Thanks Thanks:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 6 of 6
  1. #1
    Join Date
    Dec 2006
    Location
    Brisbane
    Posts
    70

    Default Do I need to sand back?

    Hi guys!
    My merbau deck is 4 1/2 years old. I originally oiled it with 3 coats of Sikkens HLSE and two coats of Sikkens deck. The last coast of oil was 2 years ago.

    The deck is exposed to the elements on the outside edges and the coating is failing. The Test of the deck is pretty good.

    Since building the deck I have built a pizza oven and a pool which is half the reason why the deck edges have become neglected.

    Do I need to sand the whole deck back or just clean and recoat? I'm concerned about the patchiness out i simply reoil.

    I'd love your feedback as to the best approach to get this deck looking brand new again. Photos can be found on the link below.

    Imgur: The magic of the Internet

    Cheers
    Steve

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Apr 2016
    Location
    Mooroopna, Victoria, Australia
    Age
    33
    Posts
    228

    Default

    It's a general rule of thhumb that timber decking is recoated every six months, usually Autumn and Spring.

    Depending on if it's a bit rough, yes give it a sand, a good clean and recoat will have it looking tip top again.
    Also, if it's nailed down, now is a good time to go around and punch those nails down again.

  4. #3
    Join Date
    Dec 2006
    Location
    Brisbane
    Posts
    70

    Default

    Quote Originally Posted by PJM16 View Post
    It's a general rule of thhumb that timber decking is recoated every six months, usually Autumn and Spring.

    Depending on if it's a bit rough, yes give it a sand, a good clean and recoat will have it looking tip top again.
    Also, if it's nailed down, now is a good time to go around and punch those nails down again.
    Thanks PJ.
    If I sand back the affected section I'm going to have to do the lot won't I? As I have coated it with HLSE with pine tint (lightest one available) it'll be patchy won't it? Or will a light sand be enough in the affected sections?

    I agree with 6 to 12 months. Life got in the way! Overall it's still in pretty good nick.

    The boards are countersunk and screwed down, so no problems with that thankfully.

    Cheers
    Steve

  5. #4
    FenceFurniture's Avatar
    FenceFurniture is offline The prize lies beneath - hidden in full view
    Join Date
    Oct 2010
    Location
    1017m up in Katoomba, NSW
    Posts
    10,649

    Default

    Quote Originally Posted by Ausyuppy View Post
    Overall it's still in pretty good nick.
    It is. Conventional wisdom says that pretty much anything that is a non-oil finish needs to be repaired over the entire surface. In the case of a large deck like yours it might be worth experimenting on sanding say 6 boards back to the first set of screws and see what it looks like (probably will look pretty obviously like a repair though). Those weather beaten edges will probably need more than one coat I think.
    Regards, FenceFurniture

    COLT DRILLS GROUP BUY
    Jan-Feb 2019 Click to send me an email

  6. #5
    Join Date
    Dec 2006
    Location
    Brisbane
    Posts
    70

    Default

    Thanks for that FenceFurniture. I've cleaned the deck and sanded back a little however it's patchy in the dodgy areas. I'm off to hire a floor sander to reluctantly sand the whole lot back. It'll look dodgy if I only do the edges.

    It's a shame as 80% of the deck is ok. I'll have to be more vigilant and oil more often.

    I'll post pics once done.

    Cheers
    Steve

  7. #6
    FenceFurniture's Avatar
    FenceFurniture is offline The prize lies beneath - hidden in full view
    Join Date
    Oct 2010
    Location
    1017m up in Katoomba, NSW
    Posts
    10,649

    Default

    There's probably a good argument for building the deck in two sections, maybe in differing timbers. The undercover section which gets recoated every 5 years, and t'other one for recoating once or twice a year. Any differences wouldn't matter then.
    Regards, FenceFurniture

    COLT DRILLS GROUP BUY
    Jan-Feb 2019 Click to send me an email

Similar Threads

  1. Replies: 14
    Last Post: 4th July 2013, 10:30 AM
  2. how to sand back this timber?
    By Reno RSS Feed in forum GENERAL ODDS N SODS
    Replies: 0
    Last Post: 9th January 2013, 06:30 PM
  3. To sand or not to sand; that is the question
    By NeilS in forum WOODTURNING - GENERAL
    Replies: 31
    Last Post: 9th May 2012, 05:44 PM
  4. is the sand from a sand blaster carcinogenic???
    By new_guy90 in forum METALWORK FORUM
    Replies: 12
    Last Post: 24th November 2010, 10:09 PM
  5. Deck - To sand, or not to sand..?
    By Theremin in forum DECKING
    Replies: 4
    Last Post: 5th August 2007, 07:54 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •