Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: T/P Structual - Help!
-
16th October 2007, 07:18 AM #1
Novice
- Join Date
- Jul 2005
- Location
- Melbourne - SE burbs
- Posts
- 23
T/P Structual - Help!
I was all set to go with my structual T/P for my decking when the last 2 places said to use H3 wet sawn.
Whilst it is a little cheaper, I'm not sure of the difference with the dry rougher header lasercut.
Will the wet sawn warp over time?
The guys at the timber yards said there's no problems using it for a decking.
-
16th October 2007 07:18 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
16th October 2007, 04:04 PM #2
Intermediate Member
- Join Date
- Oct 2007
- Location
- Cranebrook
- Posts
- 27
In some areas wet sawn decking is used. The boards are butted together and seperate as the timber shrinks. I would still prefer to have KD boards on my deck.
-
16th October 2007, 07:11 PM #3
SENIOR MEMBER
- Join Date
- Feb 2003
- Location
- Garvoc VIC AUSTRALIA
- Posts
- 11,464
-
17th October 2007, 10:14 PM #4
Novice
- Join Date
- Jul 2005
- Location
- Melbourne - SE burbs
- Posts
- 23
OK - I have ordered the structual timber and will be delivered this Friday.
I went with the T/P dried, lasercut.
Construction starts this weekend.....
I have realised I posted this in the wrong thread.....
Last edited by clackerz; 18th October 2007 at 08:41 AM. Reason: Double Post!
