Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Timber or Metal Frame...HELP!!!
-
21st October 2007, 02:50 AM #1Novice
- Join Date
- Oct 2007
- Location
- Brisbane
- Posts
- 10
Timber or Metal Frame...HELP!!!
Hi ALL.
1ST of all, I would just like to say this a great site everyone, very informative.
Here is my scenario. I have trying to get a plan together and do up my deck for my townhouse. The area is very small at 2.9M X 1.67M but the problem that I have is that it is quite shallow. The Depth that I am working with is only 20cms (see pic).
I am a bit concern using timber would be a problem due to the timber been to close to ground plus also there will not be a lot of air circulation underneath the deck since it is kinda built into a ditch. Therefore I was thinking maybe a metal framework from Stratco would be more suitable, in terms of durability, then wood in my instance.
What you think guys, timber or metal frame????
-
21st October 2007 02:50 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
21st October 2007, 09:43 PM #2
No matter what you do if its surrounded by walls on all sides ventilation will suffer.... You can increase the board gaps from 3mm to 5mm which will help...
below is a photo of the same thing as yours and we used less than 20cm
This deck was only fixed to the perimeter walls... If you are looking through other posts you will see these photo's elsewhere also
cheers utemad
-
22nd October 2007, 11:50 AM #3Novice
- Join Date
- Oct 2007
- Location
- Brisbane
- Posts
- 10
thx UteMad
So what gaps did you leave with your deck (3 or 5mm)and how did you work out the distance or how many dynabolts you need to fix ledgers on the walls?
Cheers
Similar Threads
-
Deceptive timber
By Suresh in forum HAVE YOUR SAYReplies: 1Last Post: 17th September 2005, 12:42 AM -
Any one in Melbourne intersted in getting some Tassie timber sent over?
By ozwinner in forum TIMBERReplies: 29Last Post: 28th June 2004, 02:41 PM -
What timber can I use ?
By Arron in forum TIMBERReplies: 5Last Post: 12th June 2003, 09:00 AM