Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: Davey pump Hydrascan reset
-
5th July 2006, 02:38 PM #1
Novice
- Join Date
- May 2006
- Location
- Melbourne
- Posts
- 12
Davey pump Hydrascan reset
I have a Davey XP 500 H with Hydrascan sensor. I believe it is about 6 years old.
The pump system no longer detects when the taps are operated to start the pump and supply water to the house. I know the pump works because I have tried wiring direct to the power supply and bypassed the Hydrascan controller.
I have spoken to Davey and they can only provide fault finding information for newer models of the Hydrascan; which is fitted with LED indicator and yellow reset button.
My model Hydrascan does not have the reset button; does anyone know how to replicate the reset function or suggest anything I can investigate to make the sensor operate again
Phil
-
5th July 2006 02:38 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
10th April 2008, 02:51 PM #2
New Member
- Join Date
- Apr 2008
- Location
- Tamworth, NSW
- Posts
- 2
Phil,
We are are davey pump dealer and see this problem every now and again where a pump won't start up all the time. With the hydrascans there is a sensor plate on the inside of the hydrascan which can be accessed by unscrewing the cap on top of the hydrascan. This plate can get muddy/dirty/grubby with age and will sense less and less as it does. To counter act this just give it a clean with a tooth brush or something that will fit in it and you should be right to go.
Similar Threads
-
Pump Down
By rod1949 in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 11Last Post: 24th January 2006, 08:48 PM
