Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Page 1 of 2 12 LastLast
Results 1 to 15 of 19
  1. #1
    Join Date
    Nov 2007
    Location
    Melbourne
    Age
    49
    Posts
    104

    Default Decided I should use plumber.... any advice?

    I am in the process of renovating an ensuite and have a plumbing question.

    At first I was going to do the plumbing myself, but have since changed my mind. (Yes, I did read the threads related to "am I allowed to do it myself". It was hard work).

    I have gutted the ensuite completely. Only ceiling and floorboards remain.

    My thinking is that I call in a plumber now to do all the plumbing. However, the floor will be tiled, so does the sewerage pipe need to be plumbed now before the floor is done, or after? In general, how much can the plumber do at this stage?

    I have attached an image as a reference. (I have since cleared out all the clutter in the photo). I am wondering how long (ballpark of course) it would take a plumber to the job considering the following;

    - Single story house with very good under-house access
    - The shower pipes on the back wall remain as they are, however I want a mixer rather than two taps.
    - Some basin taps can be seen on the left hand side of the photo. I want to move these to the right hand wall.
    - I am installing a new toilet in this room. No existing toilet. The main swerage pipe already runs almost inline with where I want to install the new toilet, so the PVC plumbing required (I assume) should be trivial.
    - Toilet will obviously need a water line.

    The main point here is that under house access is excellent and the room is gutted . How much time and $$ do you plumbers out there predict it should cost. (I know this is hard to estimate). I want to know by how much this is going to break the budget. I have never used a plumber before. Not sure what to expect.

    Any plumbers in the outer eastern Melbourne suburbs (Mooroolbark) interested the job??

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    Jul 2007
    Location
    Sydney-south
    Posts
    333

    Default

    Best advice I can give is to pick out your PC items first (basin/vanity, WC, mixers etc ) so your plumber knows what hes working with, without looking at it properly Id say a day for the rough in part of it plus materials, which will be dependant on how far, copper or plastic for the water, if the floor is already tiled he may hire a core hole drill for the WC waste etc. Best thing to do is get him over for a look, it wont (or shouldnt ) cost you anything for him to have a look and he will then be able to give you an idea. Dont be afraid to call a plumber champ, we're not all that bad!!
    Plumbers were around long before Jesus was a carpenter

  4. #3
    Join Date
    May 2006
    Location
    Melbourne
    Age
    53
    Posts
    198

    Default

    I had a plumber come and do some work for me a while ago, might give you a ballpark guesstimate.

    I had new hot and cold pipes run for a sink in the new pantry, a cold pipe for the new loo, and new drains for them both. It was all brand new work, nothing existing, cost me $700 (cash, of course) over two visits.

    The first round of work was to install the new pipework, took about 4 or 5 hours, then, after I had tiled the new loo room (a couple of weeks later), he came back and installed the new pan and cistern, which took about 1.5 hours. Similar to you, single story house, good underfloor access.

    But as WonderPlumb says, don't be afraid to call one up for a quote (although, this time of year, you may be in trouble!)
    Cheers,
    Anthony

  5. #4
    Join Date
    Nov 2007
    Location
    Melbourne
    Age
    49
    Posts
    104

    Default

    Quote Originally Posted by atregent View Post
    I had new hot and cold pipes run for a sink in the new pantry, a cold pipe for the new loo, and new drains for them both. It was all brand new work, nothing existing, cost me $700 (cash, of course) over two visits.
    Thanks for the response. Hmmmm.. You see, I think I could do it myself for under $100, so paying $700 kinda annoys me. I also don't see why I need a plumber to come back to fit the toilet after all the pipes have been run.

    What am I legally allowed to do to reduce the amount of work for the plumber? Am I allowed to remove some redundant pipes from the room considering the plumber will come and remove them "properly" from the house?

    Thanks.

  6. #5
    Join Date
    Jul 2007
    Location
    Sydney-south
    Posts
    333

    Default

    At the risk of starting a shyte fight about what you can and cant do, and people will say its "the plumbers trying to keep a closed shop" basically your not allowed to touch anything that is connected to an authority's main, be it sewer, gas, water etc. In saying that though your plumber might get you to get under the house and chop out some pipe or whatever under his supervision, as he would rather you got under the house than himself!
    Plumbers were around long before Jesus was a carpenter

  7. #6
    Join Date
    Jan 2007
    Location
    Adelaide - West
    Age
    43
    Posts
    620

    Default

    Quote Originally Posted by Gooner View Post
    Thanks for the response. Hmmmm.. You see, I think I could do it myself for under $100, so paying $700 kinda annoys me. I also don't see why I need a plumber to come back to fit the toilet after all the pipes have been run.

    What am I legally allowed to do to reduce the amount of work for the plumber? Am I allowed to remove some redundant pipes from the room considering the plumber will come and remove them "properly" from the house?

    Thanks.

    $100 wont buy you the copper pipe you need to do the job.
    If you dont play it, it's not an instrument!

  8. #7
    Join Date
    Jan 2004
    Location
    South of Adelaide
    Posts
    303

    Default

    'Under $100' = wishful thinking.
    Jack

  9. #8
    Join Date
    Nov 2007
    Location
    Melbourne
    Age
    49
    Posts
    104

    Default

    Quote Originally Posted by bricks View Post
    $100 wont buy you the copper pipe you need to do the job.
    Perhaps. I always tends to underestimate the cost of jobs.

    However, there is around 5-6 meters of redundant copper pipe that was used on the old hot water system that is no longer operational. I was thinking of reusing it. Should be enough.

  10. #9
    Join Date
    Nov 2007
    Location
    Canberra Australia
    Posts
    108

    Default

    Quote Originally Posted by wonderplumb View Post
    he would rather you got under the house than himself!


    Especially if it was like one of the jobs I had to do once. The manhole in the floor was about a foot square and about a foot off the ground. You literally had to be a contortionist to get under there. These day's I wouldn't have a snow ball chance in hell fitting down there

  11. #10
    Join Date
    Jan 2007
    Location
    Adelaide - West
    Age
    43
    Posts
    620

    Default

    I would have said $1000 all told, theres at least 2 days labour in doing that. Plus fittings.

    Im wondering why your going to buy a (probably) $250 in wall shower mixer, and all your tiles and your new $250 toilet, and re-do your whole bathroom. and your worried about paying a plumber.

    Your whole bathroom renovation should cost you $7-8000 minimum, If you have worked it out to be less then I suggest you make sure your numbers are correct.

    You want work in this sort of sequence
    1. gut the room
    2. get the plumber in to install the under floor plumbing and inwall water. probably take 1-1.5 days
    3. line the walls, ceiling etc...
    4. water proofing
    5. tiling
    6. get plumber back to install second fix gear.
    What about power?? ceiling exhaust fans, lights, power points.
    If you dont play it, it's not an instrument!

  12. #11
    Join Date
    Nov 2007
    Location
    Melbourne
    Age
    49
    Posts
    104

    Default

    Thanks for your response Bricks.

    I have estimated around $5k for the reno which only really includes materials. Say, a multitude number of smaller items not counted for tends to increase the cost by around another $1k. Therefore another $1k for plumbing -is- significant as I see it as a very small plumbing job. Perhaps I am missing something.

    I am still doubting that it would take a plumber more than a day on this job. It is a small room and the plumbing is basically already there... it just needs to be moved.

    I will be getting a sparkie in to add in a ceiling, fan, light, power points, etc. Don't want to be messing around with that myself.

    I will post back when I get some quotes.

    Thanks again for your response.

  13. #12
    Join Date
    Jan 2007
    Location
    Adelaide - West
    Age
    43
    Posts
    620

    Default

    on a smaller job like this, I normally work out what it's going to cost for the materials, then add 25% for sundry items.

    Most times it's reasonably hard to estimate the plaster, nails, glue, paint, screws, timber etc.. that are going to pop up through out the course of the job.

    I often find that it costs just as much to lay a tile as it does to buy it in the first place.



    If you dont play it, it's not an instrument!

  14. #13
    Join Date
    Nov 2007
    Location
    Melbourne
    Age
    49
    Posts
    104

    Default

    Well... I started to do some "preparation" before calling a plumber to get the cost down.

    My "preparation" got out of hand and before I knew it I bought a BernzOmatic MAPP torch and some silver solder and started joining a few pipes..... Joined a few pipes to the mains..made a few mistakes... had a few leaks... had to go without water for a day...(sent the wife off to the inlaws)..... had to redo some of the job.... Third time lucky.

    So far it's cost me $350 and haven't started the sewerage part yet.

    Costs add up quickly when you go out and buy a MAPP gas torch, a whole bunch of copper capillary joints, brass wall fittings, stop cocks, some lengths of copper pipe, silver solder (2% and 15%), flux, pipe clasps, galvonised nails, emery paper, steel wool, pipe cutter, some compression fittings, thread sealing paste, teflon tape, and wood for noggings.

    At least I've learnt a new skill

    I'm leaving my new plumbing work exposed for another 2-3 weeks to make sure I don'thave any leaks. I'm quite confident that my joins are good. I'm just not happy that the shower mixer needs compression joints and that this will be concealed behind the wall.

  15. #14
    Join Date
    Jun 2007
    Location
    Adelaide
    Posts
    275

    Default Plumber

    Hey Gooner why don't you do the electrical as well? You could learn some more new skills.
    Cheers
    Juan


    "If the enemy is in range, so are you."

  16. #15
    Join Date
    Nov 2007
    Location
    Melbourne
    Age
    49
    Posts
    104

    Default

    Quote Originally Posted by juan View Post
    Hey Gooner why don't you do the electrical as well? You could learn some more new skills.
    Cheers
    I know what you're saying.... but.... I have excellent access under the house and use it as a mini workshop. As a result, I can see the result of my plumbing at minimum on a weekly basis. Therefore *IF* something does happen I will pick it up quickly. Also, if the pipes do spring a leak, I have done it in a way that the water will fall straight through onto the ground. (Unless a copper pipe bursts... which I doubt).

    I lived in Europe (Germany) for 18 months and over there it is common that people do their own plumbing and electrical work. This is something that suprised me and I'm not saying I completly agree with allowing it (legally). Here it is considered "taboo".

    Personally, I will not do the electrical work myself as there are a few things I need to do that require an electrician. But let me ask you this. If you had to, say, move a power point a few feet over and it was a simple matter of disconnecting the power point and reconnecting it further down the wall, would you call an electrician to do it? Probably not, even though legally you should.

    It's a matter of assessing the risks involved and deciding on whether you are willing to accept/deal with the consequences of your DIY adventures as long as there is no risk of personal injury to anyone, (except maybe yourself). In my case I am comfortable to deal with the potential consequences of my DIY plumbing.

Page 1 of 2 12 LastLast

Similar Threads

  1. Decided on a lathe
    By Sterob in forum METALWORK FORUM
    Replies: 0
    Last Post: 19th March 2007, 09:54 PM
  2. Do you have to use a plumber?
    By gsouth in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 7
    Last Post: 2nd December 2005, 10:44 PM
  3. Finally decided to turn some decent wood
    By tonysa in forum WOODTURNING - GENERAL
    Replies: 5
    Last Post: 10th September 2005, 12:27 AM
  4. need a plumber
    By morry in forum NON WOODWORK
    Replies: 1
    Last Post: 6th September 2004, 01:26 AM
  5. Plumber
    By neddy in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 0
    Last Post: 3rd May 2004, 09:08 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •