Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: leaking corrugated water tank
-
9th September 2009, 11:50 PM #1
leaking corrugated water tank
I moved a round corrugated water tank approx 4m x 2m and in the process managed to open up one of the floor joins. :C it looks like it was soldered or something there isn't a lot of overlap between the floor sheets, probably 3mm or so.
I got inside and ran sikaflex over the join but it only holds 2 inches of water and leaks out somewhere, guess my sikaflex job wasn't the best, I didn't think it would work due to the tank sitting on a sand base I thought if there's any movement in the floor once it fills up and gets heavy the sikaflex is just going to open up.
Whats the best way to fix this once and for all? A guy at work suggested buying 15 bags of premix concrete and opening them up in side the tank and raking it level and then hosing it with the garden hose?
Read the full thread at RenovateForum.com...
-
9th September 2009 11:50 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
Leaking metal rain tank
By KenLinder in forum METALWORK FORUMReplies: 8Last Post: 15th May 2009, 09:03 PM -
Leaking metal rain tank
By KenLinder in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 0Last Post: 10th May 2009, 06:27 AM -
leaking rainwater tank
By macklin in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 9Last Post: 21st August 2006, 10:39 AM