Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 4 of 4
  1. #1
    Join Date
    May 2005
    Location
    Wagga Wagga
    Posts
    13

    Default Fixing plaster arch to rendered wall

    Hi everyone,

    I wish to fix a decorative plaster arch to internal walls which are rendered. A couple of questions ...

    1) Is cornice cement the best adhesive for this purpose?

    2) Is there any easier way of keeping the arch in situ whilst the cement goes off other than standing for an extended period with my hands up over my head?

    I've read where ceiling roses/cornice can be temporarily fixed in place with nails/screws but this would be a little difficult with rendered walls. I also can't think of any easy way to prop it up either due to the irregular shape. As I have to marry two pieces in the middle (to make the arch), I need them to stay in position else I will run into even bigger problems ....

    Cheers!

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Aug 2005
    Location
    Victoria
    Posts
    664

    Default

    Hi erm,
    If the arch is in so many pieces,why not dispense with the existing pieces,and just re do it altogether?I think that would be easier.....set up an arc bead on each side,and fill er up.This would be the easiest solution if the corners are square,but if they are round I don't think there is a n arch bead for that.But if you must reuse the old bits,cornice adhesive is the go.is it possible to strap the pieces up with something like that plastic packing strap,and nail it in to the bricks above?Or can you just put up a couple of pieces at a time, and prop them from the floor?

    Tools

  4. #3
    Join Date
    May 2005
    Location
    Wagga Wagga
    Posts
    13

    Default

    Thanks Tools,


    It's a new plaster arch (twin corner peices that together make up the arch) that I'm attaching to a square archway. I've removed the old wooden fretwork previously.

    The plaster arch is square to fit the corners however I can't think of a way to easily hold it in position whilst the cornice cement goes off. Nailing into brickwork isn't as easy as plasterboard and as I said before, propping it up will be difficult due to it's shape.

    Help!

  5. #4
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    11,464

    Default

    Use 2' masking tape to the walls to hold it up till the glue sets
    Regards, Bob Thomas

    www.wombatsawmill.com

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •