Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 9 of 9
  1. #1
    Join Date
    Jan 2006
    Location
    Amaroo ACT
    Posts
    2

    Default Reno advice wanted

    My parents are fixing up grandma's old house, but some rooms have about 3 layers of wallpaper. Removing it has proved to damage the gyprock and is an incredibly slow and difficult task, even with a steamer. Painting over it is not an option as it is cracked and sometimes peeling at the edges.
    In the main room they had the wall removed and new gyprock, very expensive.
    I was wondering whether there is something we could just whack on top of the wall, paper and all, maybe really thin MDF (thinnest I can find is 3mm), and then paint.
    Any ideas about what we could use? Is this a viable option, any better ideas.
    Appreciate your help
    Tim

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Jul 2005
    Location
    Oberon, NSW
    Age
    63
    Posts
    13,360

    Default

    I think that in the long run, what you're proposing is really just procrastination. Worse, it could easily lower house value.

    A cover up is rarely a durable solution, sooner or later someone is going to have to roll up the sleeves, open the wallet and do more or less as it sounds your parents are already doing: fix the basic surface.

    You could always go the "Changing Rooms" route... patch the existing paper to bring it flush, hang some lining paper (run it horizontally, not vertically) and either paint or wallpaper over it. IMHO, this is the simplest, easiest and cheapest option with the least likelihood of taking serious $$$ off the house value. Still only a patch, though.
    I may be weird, but I'm saving up to become eccentric.

    - Andy Mc

  4. #3
    Join Date
    Jul 2003
    Location
    Mt Druitt NSW
    Age
    64
    Posts
    518

    Default

    My house had wallpaper removed by the previous owner where it also took the gyprock paper as well. The gyprock paper was then replaced. What a mess. He must have had topcoat pumped in with an agitator truck.

    If the previous owner had though how much of a mess it would have made, he should have replced the gyprock and cornice instead. At least the walls would have been smooth and hopefully a lot "flatter" than they are today.
    ______________
    Mark
    They only call it a rort if they're not in on it

  5. #4
    Join Date
    May 2005
    Location
    sydney
    Posts
    45

    Default

    I know exactly how you feel but I would not advise any veneer type covering. That also takes time to measure up , apply etc. Are your parents remembering to score the wallpaper surface with rough sandpaper or similar to allow the steam to penetrate ? Good luck it is a long tedious job.

  6. #5
    Join Date
    Nov 2003
    Location
    Australia and France
    Posts
    8,175

    Default

    Magnet's on the money!

    You are probably facing a few layers of vinyl coated paper, which was designed for durability. Slash it with a sharp knife every six inches or so till you get a feel for a decent spacing.

    Steam from the seams inwards and work slowly, don't try to remove more than one layer at a time, but you can be rough as bags on that first one.

    If you are looking for a paint finish once the wallpaper is gone, there is a fibreglass product available in a variety of textures which goes on like wall paper and is designed to be painted over. Makes quick work of covering up crook wall surfaces.

    Cheers,

    P

  7. #6
    Join Date
    Jul 2003
    Location
    Gorokan Central Coast NSW
    Age
    79
    Posts
    2,765

    Default

    Renovating Grandma's old house eh, how did you manage to evict the wolf?

  8. #7
    Join Date
    Jan 2006
    Location
    Amaroo ACT
    Posts
    2

    Default

    THanks guys, I'll give it a go. Never heard of fibreglass paint before, sounds like it could be the goods. Expensive?

  9. #8
    Join Date
    Aug 2005
    Location
    South Australia
    Age
    77
    Posts
    279

    Default

    Bitingmidge, I'm interested in the "fibreglass product" of which you speak. I am also having the problems in this thread, removed old paper, thus damaging wall surface etc etc.

    Any further info on this?

  10. #9
    Join Date
    Nov 2005
    Location
    West Gippsland, Vic
    Age
    72
    Posts
    4,608

    Thumbs up

    You can buy a wheeled perforator for removing vinyl wallpaper. Once you've run it over the paper you will find the steamer will do its job perfectly. When we did our place we had the same problem. The previous owner had put cheap and nasty paper wall-paper over vinyl. It was really easy until we got to the vinyl. A painter mate lent us the wheeled perforator which was brilliant.
    It doesn't perforate the gyprock.
    Cheers
    If you never made a mistake, you never made anything!


Similar Threads

  1. advice wanted
    By Farm boy in forum HAND TOOLS - POWERED
    Replies: 2
    Last Post: 30th November 2005, 10:01 AM
  2. Advice wanted - chisels and block planes
    By Driver in forum HAND TOOLS - UNPOWERED
    Replies: 19
    Last Post: 2nd June 2003, 09:40 PM
  3. Dust extraction advice wanted
    By GeoffS in forum DUST EXTRACTION
    Replies: 35
    Last Post: 12th May 2003, 10:33 AM
  4. Advice wanted re Carba-Tec bandsaws
    By derekcohen in forum BANDSAWS
    Replies: 15
    Last Post: 15th February 2003, 05:58 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •