Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: Early 1800s Lathe
-
18th February 2013, 01:53 PM #1GOLD MEMBER
- Join Date
- Sep 2008
- Location
- North Carolina, USA
- Posts
- 2,327
Early 1800s Lathe
Stephensonlathe01_zpsc88a1133.jpg Photo by Asquith1 | Photobucket
Lathe used by George Stephenson at Killingworth Colliery from 1812 - 1818.
No doubt it was old when he got his hands on it, nearly two centuries ago!
Probably had a new cone pulley at some point.
Note the squared centre in the tailstock. Also seen in much more modern US lathes (1840s )
The lathe is in a reconstructed railway workshop in the wonderful Beamish Open Air Museum, County Durham, England.
Beamish, The Living Museum of the North
Photos and information by Asquith, Somerset, UK, from this thread on Practical Machinist:
George Stephenson's LatheSo much timber, so little time.
Paul
-
18th February 2013 01:53 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
18th February 2013, 09:09 PM #2
Interesting that we turners nowdays want cast iron beds, perfectly machined, centres that line up to within "thous", electronic variable speed and belt protection, and numerous other "essentials". Those old blokes would make a gross of egg cups in a day and for a shilling or less, each.
JimSometimes in the daily challenges that life gives us, we miss what is really important...
-
18th February 2013, 10:48 PM #3Retired
- Join Date
- May 1999
- Location
- Tooradin,Victoria,Australia
- Age
- 73
- Posts
- 11,918
It is interesting to note that in the early 1900's cast iron was frowned upon and resisted for any "works" lathe as the turners liked the spring in a wooden bed to keep the dead centre in the timber.
-
19th February 2013, 08:20 PM #4Senior Member
- Join Date
- Jun 2012
- Location
- Mosgiel New Zealand
- Posts
- 221
what was the power unitt looks to me it may have turned by handle power
Ian
-
20th February 2013, 02:47 AM #5GOLD MEMBER
- Join Date
- Sep 2008
- Location
- North Carolina, USA
- Posts
- 2,327
Powered by apprentice. Still used in some parts of the world.
http://images.travelpod.com/tw_slide...-ambositra.jpg
http://3.bp.blogspot.com/_qkz6-ociad...0/DSCN3068.JPG
http://4.bp.blogspot.com/-afs3oRMOyu...0/DSC_0045.jpgSo much timber, so little time.
Paul
-
20th February 2013, 10:42 PM #6SENIOR MEMBER
- Join Date
- Oct 2009
- Location
- South Africa
- Posts
- 950
Similar Threads
-
Early Fathers Day
By MitchB in forum WOODTURNING - PEN TURNINGReplies: 8Last Post: 20th August 2011, 12:32 AM -
The early bird.
By Papa in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 4Last Post: 6th December 2008, 10:38 AM -
An early morning hello . . .
By adamc in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 2Last Post: 15th August 2008, 12:17 AM -
Old (late 50s early 60s) lathe
By ozziozzi in forum WOODTURNING - GENERALReplies: 11Last Post: 6th March 2008, 09:52 PM