Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
-
26th July 2009, 10:20 AM #1
6th month anniversary! (and a finial)
This week is the 6th month anniversay of when I bought my lathe!!!
I should make something to mark the occasion. Hmmm, but what?
Oh, I made a finial!
I tried to make things sharp - but then I'd sand it and lose the sharpness. It's tiny, made from a jarrah pen blank. It's 9cm (3.5") and the pointy bit is 2mm to the first 1.5cm, then 3mm, then swells out.
I tried to get the round bits round. I didn't manage to get everything perfectly spaced. The point went a little scewiff once it was cut off and I sanded it. Doesn't matter in hair sticks, matters in finials! hmmm
I used the roughing gouge, the skew and the parting tool. It's not that I'm not taking your advice about the detail gouge Ken, I just don't have one small enough.
-
26th July 2009 10:20 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
26th July 2009, 11:38 AM #2
-
26th July 2009, 11:45 AM #3
I think I was influenced by the fact that they are having a medieval joust at Fort Linton today!
-
26th July 2009, 12:32 PM #4
6 months ay
hope there are many moreregards
Nick
veni, vidi, tornavi
Without wood it's just ...
-
26th July 2009, 12:53 PM #5Retired
- Join Date
- May 1999
- Location
- Tooradin,Victoria,Australia
- Age
- 73
- Posts
- 11,918
Getting better.
What grit and sort of paper are you using?
There is a knack to sanding "real turning stuff".
You start at the bottom of a cove and work up to the detail so you don't dub it over.
Similar Threads
-
Mulberry Hollowform w/Lemon finial
By Gil Jones in forum WOODTURNING - GENERALReplies: 18Last Post: 14th July 2009, 01:35 PM -
Lidded box needing a finial
By jefferson in forum WOODTURNING - GENERALReplies: 14Last Post: 24th June 2009, 06:48 PM -
Lidded box with finial
By dai sensei in forum WOODTURNING - GENERALReplies: 23Last Post: 18th March 2009, 09:22 AM -
Pay day come but once a month...
By Andraax in forum WOODTURNING - PEN TURNINGReplies: 11Last Post: 24th September 2006, 12:28 PM -
Small finial wanted.
By ozwinner in forum WOODTURNING - GENERALReplies: 0Last Post: 4th August 2003, 12:42 PM