Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
Thread: adaptor
-
25th June 2007, 06:49 PM #1
adaptor
I have a mini jet lathe with a 1x10 thread and vl300 lathe with a 30.5 thread is there any way to make an adaptor so that i can use the chucks with 30.5 thread on the jet lathe with out having to change the insert
thanks Andrew
-
25th June 2007 06:49 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
25th June 2007, 07:18 PM #2
Just loctite the inserts to the appropriate headstock threads and don't bother with the grub screws in the chuck?
(Dunno about Vicmarcs but I know this works with Teknatool's chucks. )
- Andy Mc
-
26th June 2007, 01:19 AM #3
Thank skew
It mite be a bit hard because i have vicmarcs & teknatools chucks
Andrew
-
26th June 2007, 07:13 AM #4
Adapter
Hi Sam,
I have one of the bigger Jet lathes (1442) and it has a 1" x 8tpi spindle thread and came with an adapter to make it a 33 x 3.5, so I know that they are made. Try at your local Jet dealer, they might be able to point you in the right direction.
Hope this helps,
RichardWoodturning by Richard Findley at www.turnersworkshop.co.uk
-
26th June 2007, 07:54 AM #5
I bought an adaptor for my Jet mini lathe to fit the Nova thingo, try Gary Pye.
Cheers,
P
-
26th June 2007, 10:30 AM #6
Andrew they can be made to any size, in your case 1"x10 female to 30x3.5mm male, cost is $50.00
Jim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!
-
26th June 2007, 12:08 PM #7
-
26th June 2007, 06:26 PM #8
Hi all
After talking jim carroll i order one from him .thank you jim
Andrew
Similar Threads
-
32mm adaptor
By EMistral in forum KITCHENSReplies: 9Last Post: 14th July 2007, 11:43 AM -
Template guide adaptor
By Packrat Pete in forum ROUTING FORUMReplies: 20Last Post: 30th June 2006, 09:37 AM -
Spindle Adaptor
By Woodencrux in forum WOODTURNING - GENERALReplies: 9Last Post: 9th January 2004, 01:29 PM -
Adaptor to fit Triton dust hose to Belt Sander
By silentC in forum TRITON / GMCReplies: 18Last Post: 18th October 2003, 09:10 AM -
Pinless Blade adaptor for GMC 16"
By Chippy Chappy in forum SCROLLERS FORUMReplies: 7Last Post: 5th August 2003, 12:16 AM