Thread: Another Which way should I turn....

Originally Posted by Doughboy

I really like the Leady, I'm impressed with the new nova and then there are probably others that need serious consideration.

Given a $2k price cap, I'd also be inclined to look at the Vicmarc VL100 series... ranges from around $1.1k for the VL100A thru to around $1.8k for the VL100C. Hmm... which Nova are you looking at? I don't think you'll find a DVR in that price range? I like the Woodfast lathes, too, but am not sure what models are available.

I think that given a choice between a Leady lathe and, say, a Nova 1624, I'd go for the Leady every time provided it came with an extra bed or two. Great unit for the money and Bruce is an approachable bloke.

Gidday I can't comment on the other lathes but I must say I love my Nova 1624
Toni

I have a big Vicmarc with electronic variable speed & a small Jet without.

The the price you are looking at, I would consider a jet with electronic variable speed.

The Jet Mini with EVS is about $600.

The next size up is the Jet 1442 about $1600 but it is a mechanical variable speed.
I don't know what it is like but I have a Shopsmith with a mechanical variable speed & it is very noisey.

The next size up is the Jet 1642 with EVS but it is about $2650.

PS. Don't forget to leave some money in the kitty for all the extra bits.... the lathe is the cheap bit.

this might sound a silly question but do you have a band saw? because if you don't then it's realy nice to have a good low speed. it's also good if you want to have a go at of center things.

my troubles with my nova 16/24 are well documented but i still wouldn't part with it if you payed me.

most evs lathes i've seen don't go below 450 rpm but i havn't had much experiance with them my self.

Matt

Originally Posted by Twinnie

...most evs lathes i've seen don't go below 450 rpm ....

The one on my Vicmarc is "Infinitely Variable 30 -3000 rpm"
That is a half a rev per second.

I use a Nova DVR and cannot fault it, cannot comment on others

Originally Posted by Cliff Rogers

The one on my Vicmarc is "Infinitely Variable 30 -3000 rpm"
That is a half a rev per second.

and if you change the belt to the other pully it is 10 to 1000rpm

Originally Posted by Zedster

I use a Nova DVR and cannot fault it, cannot comment on others

What'd that set you back? Around the $4k mark? A wee tad over his budget I think.

Originally Posted by DavidG

and if you change the belt to the other pully it is 10 to 1000rpm

Now really... how many people do you know who actually use their lathe as a winch? Some speeds are ridiculous.

Just to play Devil's Advocate, EVS isn't particularly attractive to me. Maybe just 'cos the earlier versions were so damned prone to breaking down and causing grief... something I trust that has been improved over recent years!? When one starts playing up, well... there goes your lathe.

At least with a pulley-system or mechanical speed adjustment, if something goes wrong the average shed-tinkerer with some basic metal-working skills has a chance of fixing it. (Says the bloke with the original Frankenlathe. )

Originally Posted by Skew ChiDAMN!!

Now really... how many people do you know who actually use their lathe as a winch? Some speeds are ridiculous.

Don't know about that.
With off centre turning I like to watch it go round nice and slow a few times so I know where NOT to put the hands.

Also reveals if things are where they are supposed to be.
Like turning it by hand a few times, but the lazy mans way.

Good if you're reverse turning too ... ramping up slowly ...

If you're thinking about mostly small stuff, the new version of the jet mini is certainly worth a look
It now swings 12 inches, add an extension bed and you have a lathe that has more capacity than some of the " full sized lathes".

you could then afford a band saw too.

cheers

Go and play with a few out at the Canberra guild "Shed"

Do not forget that you will need about $700 - $800 for chucks and some tools etc not counting Bandsaw, dusty, and what ever else.

Run now whilst you still can

Originally Posted by Skew ChiDAMN!!

... which Nova are you looking at? I don't think you'll find a DVR in that price range?

Originally Posted by Zedster

I use a Nova DVR and cannot fault it, cannot comment on others

Originally Posted by Skew ChiDAMN!!

What'd that set you back? Around the $4k mark? A wee tad over his budget I think.

Now wanting to buy into the "which one" debate, just noting that - in the October 2006 Australian Woodworker - Trend Timbers in Sydney were quoting a Nova DVR XP for $2,995. That price included a Supernova 2 Chuck and free delivery in the Sydney area. I realise that this was six months ago, however I don't believe that the recommended retail price would have varied much in the interim.

Originally Posted by baxter

Now wanting to buy into the "which one" debate, just noting that - in the October 2006 Australian Woodworker - Trend Timbers in Sydney were quoting a Nova DVR XP for $2,995. That price included a Supernova 2 Chuck and free delivery in the Sydney area.

Just did a search and found a Nova DVR XP going for $1999. Jim Carroll, on the other hand, has a Nova DVR3000 XP listed at $3300.

I wonder what the differences are? Hitting the Teknatool site isn't really informative... it seems the DVR's are still under development and model no's are coming and going as things change.

Still... $1999? Hmmm... I wonder what my Frankenlathe would pull on ebay? Enough for a deposit?