Needs Pictures: 0
Results 1 to 6 of 6
Thread: Aussie Bottle Stoppers
-
1st February 2020, 05:17 PM #1Senior Member
- Join Date
- Jul 2019
- Location
- Lke Macquarie NSW
- Age
- 76
- Posts
- 134
Aussie Bottle Stoppers
Not sure if this a new idea but I haven't seen it before.
No need for those wood turning stopper kits in Aus because most of wine now has screw tops. Just collect the wine bottle caps (after drinking the wine of course) and it's an easy job to turn up decorative caps to your own design. Make great gifts for Aussie wine drinkers.
So far I have found that the various caps are interchangeable so they will fit most bottles. Also found that they all fit in a recess drilled with a 30mm Forstener bit with little or no adjustment. Easy!
-
1st February 2020 05:17 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
1st February 2020, 07:39 PM #2GOLD MEMBER
- Join Date
- Jun 2006
- Location
- Burwood NSW
- Age
- 82
- Posts
- 1,247
A good idea . There could be many vatiations in the shape . It always surprises me that the traditional wine bottle stoppers still sell well .
Ted
-
2nd February 2020, 01:19 AM #3China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 4,475
It always surprises me that the traditional wine bottle stoppers still sell well That is because traditional wine drinkers consider screw tops to be the lowest of the low
-
2nd February 2020, 09:18 AM #4
I think you'll find that the cask wine 'tap' is probably lower. I went on a winery tour in the Hunter Valley years ago. The guide, when asked where does the lees (spelling?) or junk/sludge from the bottom of the vat go replied that it is pumped to South Australia where they make it into cask wine.
Those were the droids I was looking for.
https://autoblastgates.com.au
-
2nd February 2020, 10:40 AM #5SENIOR MEMBER
- Join Date
- Aug 2017
- Location
- Canberra
- Posts
- 587
Nice idea. I find once the lid comes off there's no reason to put it back on!!!!! Still like it though
-
2nd February 2020, 04:10 PM #6China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 4,475
Yep you win, Cask Wine is most likely bottom of the list (but they sell a huge amount of it)
doragus after getting side tracked it is a great idea maybe you should laser engrave them "doragus bottle stopper"
Similar Threads
-
Wine bottle stoppers
By SDB777 in forum WOODTURNING - GENERALReplies: 8Last Post: 11th January 2012, 02:36 AM -
Some Bottle Stoppers
By Whaler1 in forum WOODTURNING - GENERALReplies: 2Last Post: 15th August 2011, 11:10 PM -
A few Bottle Stoppers.
By wm460 in forum WOODTURNING - GENERALReplies: 5Last Post: 18th December 2010, 11:54 AM -
bottle stoppers
By GC in forum WOODTURNING - GENERALReplies: 2Last Post: 31st August 2008, 11:10 PM -
Bottle Stoppers
By Stu in Tokyo in forum WOODTURNING - GENERALReplies: 15Last Post: 11th July 2008, 08:49 PM