Page 1 of 2 12 LastLast
Results 1 to 15 of 25
  1. #1
    Join Date
    Apr 2019
    Location
    AFRICA
    Age
    74
    Posts
    14

    Default How to avoid /remove ugly grooves /rings in ebony or hardwood when finally polishing

    ALL I wanted originally --was a tip on how to sand smooth a ebony goblet (foto posted )
    see the nasty rings that persist ? How to avoid this ? tried every tungsten /scraper /sandpaper .emery cloth I can find --still those "RINGS " persist !

    Surely there must be a solution ????

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    Apr 2019
    Location
    AFRICA
    Age
    74
    Posts
    14

    Default

    IMG_0577.jpgIMG_0577.jpgIMG_0577.jpg
    Quote Originally Posted by ACACIA2 View Post
    ALL I wanted originally --was a tip on how to sand smooth a ebony goblet (foto posted )
    see the nasty rings that persist ? How to avoid this ? tried every tungsten /scraper /sandpaper .emery cloth I can find --still those "RINGS " persist !

    Surely there must be a solution ????

  4. #3
    Join Date
    Apr 2019
    Location
    AFRICA
    Age
    74
    Posts
    14

    Default Scatches /grooves on ebony

    Oops sorry --only wanted one foto ----

    blow up the image --u will see the lp record grooves that persist -on the lower trumpet base flange --

    tried everything --even garnet & diamond /broken glass ---wire wool etc --i give up--
    must be smooth like those tanzanian makonde carvings ---or maybe my diy homemade lathe is too slow ?2000 rpm max ?
    Last edited by ACACIA2; 1st May 2019 at 11:13 PM. Reason: RPM

  5. #4
    Join Date
    May 1999
    Location
    Grovedale (Geelong) Victoria
    Age
    74
    Posts
    12,183

    Default

    Not trying to be smart here but....

    Abrasives, glass, tungsten, scrapers, etc won't help, only good woodturning technique and sharp tools used correctly will clean up those nasty rings by not making them there in the first place.

    Ebony isn't an easy timber to turn unless you have good turning skills. Those groves could be sanded out in a soft timber but not in ebony. However with good turning technique they wouldn't be there in softwood or ebony, so shouldn't need to be sanded out.

    I'm sure others will agree and may give you some tips. The best tip I can give you to fix the problem is to get some lessons from a skilled turner. Maybe have a look on line and see if you can pick up some insight into turning goblets with clean smooth cuts.

    Doesn't help with what you have right now unless you can re chuck and turn the inside again but might be of help for future goblets and other hollow objects.

    Cheers - Neil
    KEEP A LID ON THE GARBAGE... Report spam, scams, and inappropriate posts, PMs and Blogs.
    Use the Report icon at the bottom of all Posts, PM's and Blog entries.


  6. #5
    Join Date
    Nov 2007
    Location
    Caboolture, QLD, Aust
    Posts
    236

    Default

    Have you tried hand sanding with the grain? Across the grooves? Fiddly, I know, but normally works for me.

    Grooved or not, I love what you've done with this.

    Cheers
    Redbeard

  7. #6
    Join Date
    Apr 2011
    Location
    McBride BC Canada
    Posts
    3,543

    Default

    Your ebony is the next best thing to stone. Might as well call it stone, OK?

    I carve some Brazilian steatite soapstone. I can carve it with a screwdriver if I had to.
    Like finishing an automotive paint job, the final surface gets 400 then 600 then 800 then 1,500 grit 3M Wet and dry sandpaper, used wet.
    I wet the stone and rub the papers into that.
    Then it has to really dry for a final waxing and buffing with a lot to friction to heat the wax.
    What I get is a water-wet, glossy looking surface with no scratches.
    Of course, you can leave parts at any stage for a different surface appearance.

  8. #7
    Join Date
    Jun 2005
    Location
    Townsville. Tropical Nth Qld.
    Posts
    1,243

    Default

    Quote Originally Posted by ACACIA2 View Post
    ALL I wanted originally --was a tip on how to sand smooth a ebony goblet (foto posted )
    see the nasty rings that persist ? How to avoid this ? tried every tungsten /scraper /sandpaper .emery cloth I can find --still those "RINGS " persist !

    Surely there must be a solution ????
    Have you tried a Negative Rake Scraper on a 45° angle? That's what I use and with care it takes microscopic fluffy shavings off.
    Rgds,
    Crocy.

  9. #8
    Join Date
    Jun 2014
    Location
    Tucson, Arizona, USA
    Posts
    251

    Default

    That's a good looking vase, Acacia2. I can see why you want to remove the rings. Near the flare just below the stem, are those sanding lines or are they growth rings?

    Now to your question. If the piece can be remounted, and the opening is large enough to use a small powered sanding disc in it, start with 60 grit, and sand until the grooves disappear. Go through the grits up to the finest made, 220 grit here in the U.S. After the finest disc, then hand sand with the other fine grits until you are satisfied. ............. Jerry (in Tucson)USA

  10. #9
    Join Date
    Apr 2019
    Location
    AFRICA
    Age
    74
    Posts
    14

    Default Most grateful --thanks

    Quote Originally Posted by Nubsnstubs View Post
    That's a good looking vase, Acacia2. I can see why you want to remove the rings. Near the flare just below the stem, are those sanding lines or are they growth rings?

    Now to your question. If the piece can be remounted, and the opening is large enough to use a small powered sanding disc in it, start with 60 grit, and sand until the grooves disappear. Go through the grits up to the finest made, 220 grit here in the U.S. After the finest disc, then hand sand with the other fine grits until you are satisfied. ............. Jerry (in Tucson)USA
    REALLY APPRECIATE YOUR COMPLIMENTS --I AM BLOWN AWAY BY YOUR GREAT ADVICE ---MANY THANKS TO ALL

    ( no -those rings you see on base flare are not growth rings ----nasty grooves that wont go away !!

  11. #10
    Join Date
    Jul 2008
    Location
    Banyo Qld
    Age
    77
    Posts
    51

    Default

    Takes a fair bit to get me to post in here and it's usually because peope don't get the gist of a question. So, sorry if I rain on anyone's parade but it looks like almost everyone completely missed the point of this thread with the exception of ubeaut and Old Croc.

    It's ebony people sanding won't help in most instances it will just blunt the abrasive. Those rings need to be scraped or clean cut out before sanding. The lines at base of goblet are testament to what abrasive will/won't do.

    Ebony is usually unforgivable when it comes to turning and finishing so as mentioned above sharp tools and clean precise cutting is imperative as flaws usually can't be sanded out like you can with softer timbers.

    Darky
    Evil to the bone. But really cute.

  12. #11
    Join Date
    Aug 2017
    Location
    Canberra
    Posts
    585

    Default

    Ubeaut is on the money! Especially for hardwoods sanding only takes away such a small amount each grit. Freshly sharpen will get you there plus technique, though I have none of that!!!

  13. #12
    Join Date
    Apr 2013
    Location
    Sydney
    Posts
    1,556

    Default

    Quote Originally Posted by brainstrust View Post
    Freshly sharpen will get you there plus technique, though I have none of that!!!
    me 3 brainstrust. Technique, isn't that a French dance/night club?

  14. #13
    Mobyturns's Avatar
    Mobyturns is offline In An Instant Your Life Can Change Forever
    Join Date
    Jul 2012
    Location
    "Brownsville" Nth QLD
    Age
    66
    Posts
    4,413

    Default

    Neil & Crocy are on the money, however I disagree on a minor point - correct sanding technique can take out some / most / all of the flaws (if there is sufficient wall thickness of course). Unfortunately to many turners are in a rush to complete a project and do not think ahead far enough to make life easier for themselves in the following tasks.

    Aggressive roughing cuts often lead to multiple problems later on, so as both Neil and Crocy say only good turning techniques will solve those issues. Many of the harder timbers such as Ebony, our Australian Gidgee's etc, respond far better to dare I say it "scraping" in the finishing cuts. A good scraper used in "sheer scraping" mode can remove what many turners refer to as "angel hair" shavings on those woods, so fine that they seem to hover or float in the air. That will reduce a lot of sanding effort!

    A significant issue with sanding extremely hard woods is lathe speed - most turners sand way to fast at high lathe RPM's which then generates lots of heat, causes end grain checking, often creates burnishing, brings resins etc to the surface, wears out sandpaper very very rapidly, and produces a pretty poor sanding result!

    Slow the lathe speed right down to 300rpm or so, start to sand with a grit coarse enough (perhaps #100 to 120 maybe #80) to remove the material in those unsightly rings. As sanding progress slows throw the paper and resume with a fresh piece of the same grit. If progress is to slow go down another grit! ONLY when the rings are removed down to the desired surface, go up to the next grit, then sand until any sanding groves are removed. Repeat progressively going up the grits until at least 1200# on ebony etc. Don't be tempted to skip grits on very hard woods!!!! Then use some of Neil's fantastic EEE at his recommended lathe speeds and you should end up with a finish that most turners would be very proud of. That should be "good enough" for ebony as it will retain a high lustre with no other finishing required.

    Wet sanding can also be very useful on very hard woods, with a "cutting fluid" such as water, mineral oil etc used as both a cooling medium and as a lubricant. Wet sanding will also fill pores, and requires that a wet slurry be maintained at all times while sanding. One can easily tell when the slurry dries as the paper gets "grabby." Wet the paper again with your chosen "cutting fluid" and resume. Finishes such as Organ Oil's "Hi-Speed Finishing Oil" ( or "Hard Burnishing Oil") are designed to be used in that manner - Organoil
    Mobyturns

    In An Instant Your Life CanChange Forever

  15. #14
    Join Date
    Apr 2019
    Location
    AFRICA
    Age
    74
    Posts
    14

    Default

    Thankyou Darklord ---appears you understand just how difficult ebony types can be --this is combretum imberbe -
    can be a real sod to achieve a smooth finish ---appreciate the advice --
    will re-sharpen diy tools & start all over ----using WET deadwood this time ---that dry ebony is glass hard --always those lp record ugly lines appear -----and I never get this with a dozen other Zulu hardwoods ----just Imberbe !
    Many thanks to all who gave me great advice -have now more determination to clean up this unsightly mess

    ACACIA2

  16. #15
    Join Date
    Apr 2019
    Location
    AFRICA
    Age
    74
    Posts
    14

    Default

    most grateful to Mobyturns ----

    this combretum is huge & heavy --my diy lathe slowest speed is 250 rpm --fastest is 2000 rpm

    got to start roughing VERY slow ---or the ebony mass will tear itself out of the faceplate (deeply imbedded self tapping screws
    can sheer off ---especially with 40 -50 kg mass of crooked ebony log whirling /vibrating /shaking like hell !

    scary to rough it esp the dry brittle variety ---like concrete !!

    I will rather use wet cut combretum now --turns easier ----better results ---

    thankyou for the insight & great ideas -----

    ACACIA2

Page 1 of 2 12 LastLast

Similar Threads

  1. Ebony --how to avoid grooves when polishing
    By ACACIA2 in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 8
    Last Post: 29th April 2019, 11:50 AM
  2. Replies: 5
    Last Post: 22nd April 2018, 04:00 PM
  3. sanding/polishing into tight v-grooves
    By Evanism in forum WOODTURNING - GENERAL
    Replies: 19
    Last Post: 27th April 2015, 11:47 PM
  4. Ugly yellow mark after polishing floorboards
    By Reno RSS Feed in forum FLOORING
    Replies: 0
    Last Post: 25th August 2009, 01:10 AM
  5. Grooves up - how to remove
    By w0rksh0p in forum FLOORING, DECKING, STUMPS, etc.
    Replies: 11
    Last Post: 10th December 2007, 03:06 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •