Likes: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
Thread: Turning Banksia Cones.
-
7th November 2019, 09:48 PM #1Novice
- Join Date
- Dec 2010
- Location
- wairewa
- Posts
- 18
Turning Banksia Cones.
Brought some Banksia Cones back from WA.
Any pointers in the pitfalls of turning them up for some small objects.
Try to pick your brains on this one.
-
7th November 2019 09:48 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
7th November 2019, 11:07 PM #2GOLD MEMBER
- Join Date
- Jun 2005
- Location
- Townsville. Tropical Nth Qld.
- Posts
- 1,244
Yep, real messy stuff. I have heard that some guys soak them in water for a few days, let them drain a bit then turn them, not great for your lathe. I just put the fan on high and vacuum up when I am finished. To keep the original bits together after turning, I run diluted sanding sealer into them and finish with Danish Oil.
Rgds,
Crocy.
-
8th November 2019, 12:16 AM #3SENIOR MEMBER
- Join Date
- Feb 2016
- Location
- Perth WA Australia
- Posts
- 829
Depending on how fresh they are they could be filled with all kinds of bugs. They're filled with voids so make sure your chisels are sharp and watch your technique as the cone can catch easily. But like old croc says, they are dusty and make an absolute mess
-
8th November 2019, 11:00 AM #4
I have only done a couple but like the others say sharp tools and go easy. I first roughed to round to see just what there is to work with before deciding on the shape. I used danish oil as a finish. As to mess mine were dry so not any messier than turning burl. In a lot of ways it is a bit like working with burl.
Regards
John
-
8th November 2019, 04:06 PM #5
Dust from turning could be carcinogenic ,take all precautions.I have some Bull Banksias growing on my on my property they are all around this area I give the Banksia nuts to the local turners here.Some slice them thinly & make drink coasters out of them
Johnno
Everyone has a photographic memory, some just don't have film.
-
10th November 2019, 07:30 AM #6Member
- Join Date
- Jan 2009
- Location
- Pluto
- Posts
- 72
This is link to David's website; included only to show the work he does.
The pointer: Per David, run some thin CA glue around the solid part of the eye to keep it from separating from the rest of the pod. It also fill in any small cracks around it and helps keep it from chipping. CA should be added just before the last couple of cuts; you want the bulk and the red fluff gone before using the CA. I haven't had any more "eyes" chipping since using the CA.
Hollow form Banksia seed pod vessels. — David Datwyler
-
10th November 2019, 11:50 PM #7Novice
- Join Date
- Dec 2010
- Location
- wairewa
- Posts
- 18
turning banksia cones
Thank you all for your replies. I have to let them dry before they will be used.
Will be interesting how it will turn out. Cheers Gary
-
11th November 2019, 10:47 PM #8Senior Member
- Join Date
- Jul 2008
- Location
- geelong
- Posts
- 359
s with anything -dry is good. will follow your exploits as have a number of banksia grandis cones. Only tried to turn one as a kind of tube format for the top -vent for a light. It broke away from the lathe part way through the hollowing out. Had some substance to it but was still furry about the mouths (think big bad banksia men) Not necessarily a bad thing. Coasters is probably the most PRACTICAL thing. Find something more interesting ideally.
Similar Threads
-
Pine Cones & Banksia Lucida's
By Perfect Pens in forum WOODTURNING - PEN TURNINGReplies: 3Last Post: 29th June 2013, 06:03 PM -
VIC.Swap Banksia cones?
By benupton in forum TIMBER SWAPReplies: 7Last Post: 19th February 2010, 03:00 PM -
Pine Cones & Banksia Casts
By dai sensei in forum WOODTURNING - PEN TURNINGReplies: 17Last Post: 21st September 2009, 08:54 PM -
Turning Banksia
By stevew in forum WOODTURNING - GENERALReplies: 9Last Post: 6th April 2008, 01:42 PM