Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: Did I get a Bargain???
-
16th December 2010, 09:43 PM #1
Did I get a Bargain???
Just picked up an ELU lathe for 250 bucks in very excellent order. A young lad's grandpa bought it then his eyesight failed so the boy got it and it was too big for his needs. I don't know much about lathes so I'll leave it to the experts to say whether I got it for a reasonable price.
I'll post a pic later when I get home.
Cheers
Sheddie in the ShedIf you never made a mistake, you never made anything!
-
16th December 2010 09:43 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
16th December 2010, 09:58 PM #2
Sorry Mick only worth about half that.
Good little spindle lathe though.
They were well made in their days mid 70sJim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!
-
16th December 2010, 10:14 PM #3Retired
- Join Date
- May 1999
- Location
- Tooradin,Victoria,Australia
- Age
- 73
- Posts
- 11,918
If you need or want a revolving centre for the tailstock I can give you one.
They don't use morse tapers but a lock in type if I remember rightly.
-
18th December 2010, 10:10 PM #4
whatever it is - i'll have it mate. Does it come with destructions?
Here's some pics of said lathe. Dunno what the table thin g is but it swings through 90 deg so the face is pointed squarely away from the chuck thing.
Attachment 156151
Attachment 156152
Attachment 156153
Attachment 156154
Attachment 156155
CheersIf you never made a mistake, you never made anything!
-
18th December 2010, 10:56 PM #5Retired
- Join Date
- May 1999
- Location
- Tooradin,Victoria,Australia
- Age
- 73
- Posts
- 11,918
Yep that is the centre I have. Pm me your address and I will send it over.
The table I think is used for sanding. You put sandpaper on a disc on the face plate.
-
18th December 2010, 10:59 PM #6
Hi Shedhand, I am sure you will have a bit of fun with this lathe, mostly only good for spindle work. I sold one just like it in better nick not long ago for the best price of $130.00. As I said you should have fun.
Similar Threads
-
is this a bargain or not?
By Travis Edwards in forum SMALL TIMBER MILLINGReplies: 13Last Post: 19th November 2009, 08:33 AM -
TS EBQ 55 bargain
By Scally in forum FESTOOL FORUMReplies: 4Last Post: 15th January 2009, 08:15 AM -
Here's a bargain
By MikeyRoberts in forum BOAT BUILDING / REPAIRINGReplies: 1Last Post: 4th January 2008, 03:05 PM -
Is this a bargain????
By rtfarty in forum SCROLLERS FORUMReplies: 5Last Post: 17th June 2006, 09:50 AM -
Bargain!!
By Wood Butcher in forum HAND TOOLS - POWEREDReplies: 3Last Post: 20th February 2006, 02:23 PM