Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Small Birch Box w/Walnut Lid
-
14th January 2007, 08:19 AM #1
Small Birch Box w/Walnut Lid
Been playing around with the lathe I posted about before Christmas.... I had a chunk of a Birch limb from a tree in my son's yard.
With a piece of Walnut for a lid, I hollowed the lid as well, Trying a few techniques. Just playing around learning to use my new toys, the lathe, new chuck, etc.
Total piece is about 3" tall and 3+" wide... less than 1/8" thick in most areas. Can you see the crack? CA glued it back together. Before the several coats of wipe-on Poly & final rubbing with Rottenstone & Mineral oil.
Got a couple of other jewels on the lathe (waiting) but I really need a curved tool rest. I got the 3/4" bar and 1/2" cut to size, will bend the 1/2" but ran out of wire for the MIG and have to pick some up to weld up. Making 4 sizes & shapes for future endeavors.
-
14th January 2007 08:19 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
14th January 2007, 10:07 AM #2
Hickory, that's what makes wood a treasure - you never know what will be revealed until the craftsman has carefully found the piece hidden within. Well done me old china.
-
14th January 2007, 11:16 AM #3
That's a really fine job Hickory . The Birch reminds me of the Tibouchina tree I got from my neighbours front yard, including the little dead wood intrusions.
Neil____________________________________________Every day presents an opportunity to learn something new
Similar Threads
-
How to make my Dual Cyclone - Dust Extractor
By Turbulance in forum DUST EXTRACTIONReplies: 17Last Post: 22nd November 2008, 08:38 AM -
Routing a cavity?
By JohnBoy in forum ROUTING FORUMReplies: 8Last Post: 9th August 2004, 04:12 PM -
Wooden Hinge Jewellery Box
By DPB in forum WOODWORK PICSReplies: 22Last Post: 22nd June 2004, 08:58 PM -
Small box
By Garry1953 in forum WOODWORK PICSReplies: 2Last Post: 24th November 2003, 01:36 PM -
vac box for template routing
By soundman in forum ROUTING FORUMReplies: 4Last Post: 27th July 2002, 11:56 PM