Needs Pictures: 0
Results 1 to 4 of 4
Thread: Birds in paradise
-
27th May 2023, 08:26 AM #1
Birds in paradise
("Birds in Paradise")
Hello once again everyone I have now completed about 90% of the carving and will be starting the pyrography work next. Most of the details are carved but there will be many achieved with pyrography and color. I have many small leaves at the bottom that overlap many times that is what I've been working on. You will see many changes in the photos if you have been following along the whole time.Jack Of All Master Of None
-
27th May 2023 08:26 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
28th May 2023, 04:57 AM #2
PYROGRAPHY
Okay everyone I have now finished the pyrography section on the "Birds In Paradise" project. You can see in the photos you do not have to burn the hell out of your piece to give some nice pyrography embellishments. Now on to the coloring portion of this project.Jack Of All Master Of None
-
1st June 2023, 04:31 AM #3
"Birds In Paradise"
This piece was made from two pieces of soft Maple glued into a blank that was first turned on the lathe to various thicknesses to allow the carving process to take place. After turning on the lathe the pattern was hand drawn and hand carved and pyrography was applied by myself. The finish size is 7" x 11" and the coloring was achieved with alcohol inks blended to make the colors you see. The final finish is satin lacquer, the inside was colored with black acrylic.Jack Of All Master Of None
-
7th June 2023, 06:47 PM #4Member
- Join Date
- Sep 2004
- Location
- Adelaide
- Posts
- 89
Amazing work, although I don't know if I would have gone all out with the colour. Personally I think it looked fine once the pyrography was done, but tha'ts only me.
Well done.
Similar Threads
-
Paradise
By Mr Fiddleback in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 0Last Post: 9th December 2020, 09:19 PM -
Paradise Lost - Paradise Found
By viiking in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 11Last Post: 15th February 2009, 10:27 PM -
Paradise
By Rikk38 in forum SCROLLERS FORUMReplies: 4Last Post: 20th April 2007, 09:45 PM -
Pen Turners Paradise
By clubbyr8 in forum WOODTURNING - PEN TURNINGReplies: 0Last Post: 12th September 2006, 11:52 AM -
Woodworkers Paradise!!
By Taries in forum TIMBERReplies: 5Last Post: 22nd June 2006, 11:34 PM