Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 21
Thread: blunt chisels
-
4th April 2015, 10:52 AM #1
blunt chisels
A fellow forum member dropped over yesterday to get a couple of chisels re-shaped
unfortunately I only remembered to take a photo when we got to the last one
a 3/8" P&N bowl gouge
Chisel composit_9592.jpg
If anything the 1/2" bowl gouge needed a bit more work
and the skew had more facets on it than the Hope diamond
He wasn't game to bring the detail gougesregards
Nick
veni, vidi, tornavi
Without wood it's just ...
-
4th April 2015 10:52 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
30th January 2016, 08:55 AM #2
again
He came around again last Monday
look what he did to the chisel
bowl gouge_3398.jpg bowl gouge_3399.jpg
Lucky I'm a nice chap
It went home looking like this
bowl gouge_3403.jpg bowl gouge_3404.jpg
He has firm instructions to get himself (or make himself) a grinding jig
we'll see what happensregards
Nick
veni, vidi, tornavi
Without wood it's just ...
-
30th January 2016, 09:20 AM #3Originally Posted by Sawdust MakerThose were the droids I was looking for.
https://autoblastgates.com.au
-
30th January 2016, 11:18 AM #4GOLD MEMBER
- Join Date
- Sep 2008
- Location
- North Carolina, USA
- Posts
- 2,327
-
30th January 2016, 01:13 PM #5
Hand sharpening is an acquired skill, that takes years of practice to perfect.
Thank Dog for my Tormek!Pat
Work is a necessary evil to be avoided. Mark Twain
-
30th January 2016, 07:30 PM #6
I'm just getting into wood turning so I'm interested what jigs you'd recommend?
I've been informed that turners just grind instead of any wetstone/oilstone/etc type work. Has anyone got some good instructional videos on preparing a roughing gouge, parting and skew chisel? (I'm just working on getting some centre-work skills before contemplating bowls, etc)
Cheers,
Mark
-
30th January 2016, 07:48 PM #7
Hello Mark, sharp tools are safer to use.
The Wolverine Jig is a good jig for starters, up to the Tormek system. There is a wide range in prices.
A good jig allows repeatable grinds with minimal time off the lathe.Pat
Work is a necessary evil to be avoided. Mark Twain
-
30th January 2016, 09:11 PM #8
I've heard that the vicmarc setup is ok here
I use the tormek jigs on a normal grinder with an Alox or CBN wheel - I should polish up on the tormek but it's not set up at the moment (I'm attempting to reorganise the shed)regards
Nick
veni, vidi, tornavi
Without wood it's just ...
-
31st January 2016, 12:24 PM #9
[QUOTE=(I'm attempting to reorganise the shed)[/QUOTE]
Been there for 33 years... )
JimSometimes in the daily challenges that life gives us, we miss what is really important...
-
31st January 2016, 01:44 PM #10GOLD MEMBER
- Join Date
- Sep 2008
- Location
- North Carolina, USA
- Posts
- 2,327
-
31st January 2016, 02:07 PM #11
OK 'chisel destroyer', come out from behind those dark glasses, trench coat and false moustache, come along to.....
Sharpening Get Together (GTG), March 13th, 2016
.... all welcome and NO INCRIMINATIONS!
flettya rock is an obsolete tool ......... until you don’t have a hammer!
-
31st January 2016, 03:50 PM #12
I use the trugrind jig.
Would live the vicmarc to have keyed angle lock positions. Suggested i can just mark the rnge on the jig but that allows room for error IMHO
Dave TTC
Turning Wood Into Art
-
31st January 2016, 04:19 PM #13
-
31st January 2016, 06:28 PM #14
-
1st February 2016, 01:19 PM #15
Of course you know who I am. There was another thread ages ago from me thanking Nick(Sawdust Maker) for reshaping my chisels.
Just to clarify on the gouge when you look at this with the bevel facing you the left hand side I was grinding in a hollow. And I have been told that having a hollow in a turning chisel increases the change of a catch. So I got rid of that by grinding the wing straight.
As to the sharpening GTG I am about 50% of making it. Have already mention it to Fletty.
Similar Threads
-
to be blunt
By springwater in forum TIMBERReplies: 5Last Post: 5th June 2008, 08:30 AM -
The blunt or not so blunt end???
By soundman in forum BOAT DESIGNS / PLANSReplies: 20Last Post: 2nd April 2008, 11:58 AM -
Getting Old Wood Square = Nails = blunt blade = termites!!
By zootog in forum TRITON / GMCReplies: 5Last Post: 13th November 2006, 04:58 AM -
Blunt new router bits
By echnidna in forum WOODWORK - GENERALReplies: 4Last Post: 4th March 2005, 09:12 PM -
blunt saw blade
By geoffbarker in forum TRITON / GMCReplies: 2Last Post: 10th March 2004, 09:56 PM