Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 14 of 14
Thread: Bubinga bowl
-
1st October 2006, 07:57 PM #1
Bubinga bowl
I have only been turning since march of this year and thought I would post a picture of a bubinga bowl I have done, comments please, oh the size of the bowl is 17" across x 2.75" deep
One Good turn deserves another.
Cheers Colin
-
1st October 2006 07:57 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
1st October 2006, 08:42 PM #2
Very nice Colin, lovely timber
Cheers
DJ
ADMIN
-
1st October 2006, 08:45 PM #3
Clean form and a good finish!
You've only been turning since March? :eek: Nar... pull the other one, it's got bells on it.
Greenie launched.
- Andy Mc
-
1st October 2006, 08:48 PM #4Intermediate Member
- Join Date
- Sep 2006
- Location
- Melbourne
- Age
- 35
- Posts
- 26
great shape great bit.
if you did remount it to get the bottem done how did you do it?
where did you get such a big bit.
isn't bubinga from souith america is it grown in Aus?
-
1st October 2006, 09:45 PM #5
Please find photo of bottom of bowl with small recess for mounting, got the wood from a specialist timber supplier here in the uk cost £38.00 ($95.00 AU)($71.00 usa), thanks Skew for the compliment but have only been turning since then, but will admit to getting a lot of tuition, hints and tips from an old local turner, infact go round there on a thursday night to be shown something new or just have the crack and talk about wood turning, so possibly wouldnot be as far a head if it were not for his help and advice.
One Good turn deserves another.
Cheers Colin
-
2nd October 2006, 01:11 AM #6
Nice job Colin I like the shape and the finish looks good. I feel sorry for you guys having to buy your blanks though! I'm too much of a tight-ass and gather everything I've got and then trade when possible. Mind you, if I added up the fuel cost's, chainsaws etc etc - you're probably in front!
-
2nd October 2006, 02:33 PM #7You've got to risk it to get the biscuit
- Join Date
- Jan 2006
- Location
- Canberra
- Age
- 32
- Posts
- 4,195
very nice job.
cheersS T I R L O
-
2nd October 2006, 06:12 PM #8
the reason Colin has to buy blanks up there is Scotland is quite simple. You see many, many years ago great forests covered the whole of Scotland and through those forests scuttled hairy little Scotsmen in pursuit of other little, hairy Scotsmen. They fought and they fought where ever they were and the winner took awa the losers head and his tackle and brought them back to his village where they would adorn the walls of his hut. Naturally, the sense of smell back in those days was somewhat more different than today's personkind.
Anyway, as time and fights went by, it became apparent the population was dwindling and soon it appeared as though there would be no trophy heads or knackers. There was a great wailing, much greeting and a gnashing of the tooth (only having one tooth per mouth was a sign of great wisdom and dignity, but it made it a reet bugger when it came to traditional gnashing).
And it came to pass that one bright spark came up with the idea of using fake heads. Yet another thought up discs (so they would hang better against the walls of the hut and palisades).
One day whilst a fierce, bewhiskered old warrior was lamenting the days of real haids, he happened to throw his favourite war axe at someone who was balancing a piece of spinning wood on his chin. The wood was spinning so fast that by the time the axe went past it, (to bury itself between the eyes of the twirler - no subtlety in those days), a partial cylinder was turned. Well it stands to reason that it was this very event that was the birth of woodturning and before you know it all the Great Forests had gone lost to savagely competitive woodturning.
Now, all we have left are the symbols of once mighty competitions - bowl turning (the head), spindle turning (the bones for the lesser warriors), cabre tossing (stealing a bit o' spindle turning), and golf (the knackers).
Noo, it's a far, far cry from the days of yore.
They even tried turning bits of gorse and heather but it was just not the same. After all how could you compare a little twiggy piece with a might fir. That is something else that they carried over until today except they call it pen and lace bobbin turning.
Och, we hae fallen a mighty way doon from the heights we once knew.
-
2nd October 2006, 06:21 PM #9
-
3rd October 2006, 06:53 AM #10
Skew... Hammer.... What Th'----???
Oh, yeah... beautiful bowl... right nice bit o' turnin', Woody from Spean. Awesome piece of wood.
Sideways turnin' needs a heck of a tool rest. What do you have?
Well done.Last edited by OGYT; 3rd October 2006 at 06:54 AM. Reason: to remove a )
Al
Some minds are like concrete thoroughly mixed up and permanently set.
-
3rd October 2006, 08:31 AM #11
The bowl looks great but if you are going to do work as large as that the consider getting a larger set of jaws for your chuck. The amount of leverage you would have had near the edge of that bowl I'm surprised it didn't launch itself at you.
will admit to getting a lot of tuition, hints and tips from an old local turner, infact go round there on a thursday night to be shown something new or just have the crack and talk about wood turning, so possibly wouldnot be as far a head if it were not for his help and advice.
-
3rd October 2006, 08:38 AM #12
The history, legends and philosophy are a very important part of woodturning OGYT as you well know. So are the folktales handed doon frae generation ta generation even the ones made up the day before yesterday - those too have been handed doon frae generation ta generation.
The history of woodturning is the history of mankind in his struggle to take summat natural and make something totally different from it.
Long may ye turn and never hae ye a dig-in.
-
3rd October 2006, 09:36 AM #13
top effort!
I have only been turning since march of this year and thought I would post a picture of a bubinga bowl I have done, comments please, oh the size of the bowl is 17" across x 2.75" deep
I cant say I like your timber costs....:eek:Inspiration exists, but it has to find you working. — Pablo Picasso
-
4th October 2006, 09:04 AM #14
Xelent work my man!
As usual the old rule of simple forms to bring out the beauty of the timber is well applied.
Similar Threads
-
Bowl Gouge advice
By cypher in forum WOODTURNING - GENERALReplies: 11Last Post: 28th June 2006, 06:34 PM -
Getting nasty catches on a bowl
By CameronPotter in forum WOODTURNING - GENERALReplies: 36Last Post: 23rd January 2006, 09:30 AM -
Gmelina Natural Edge Bowl
By Little Festo in forum WOODWORK PICSReplies: 16Last Post: 4th August 2005, 10:15 AM -
Bowl steady, cheap and cheerful
By rsser in forum WOODTURNING - GENERALReplies: 4Last Post: 10th September 2004, 10:05 PM -
Oops, I'm a sugar bowl...
By jhunt_2000 in forum WOODWORK PICSReplies: 5Last Post: 17th December 2003, 03:20 PM