Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
Thread: Bushes for CA polishing
-
23rd August 2011, 06:55 PM #1
Bushes for CA polishing
I just received the bushes in the photo from Penturners Products in the United States. They are professionally made to a high quality and I'm looking forward to using them on the weekend as I have a few blanks lined up waiting for the CA to go on. These might save me from losing blanks and tubes with the CA sticking to the metal bushes.
They were certainly cheap enough at $8-79 for a set and arrived in 10 days. I can also vouch for the owner, John's honesty as he refunded me $1 I overpaid for postage.
Might be worth a try for those with the same sticking problem as me. I will post after I have tried them with a report.
-
23rd August 2011 06:55 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
23rd August 2011, 10:05 PM #2
Keep you eye out for Acetal/Delron rod on Ebay, usually ~$10 for 1ft of 20mm delivered, and make your own.
Neil____________________________________________Every day presents an opportunity to learn something new
-
24th August 2011, 09:09 AM #3
Johnny from Penturners products is great to deal with. I bought a live centre and a dead centre from him and they arrived very quickly and were great quality.
I use them for turning with mandrell-less bushes, and also finishing. The CA comes off them pretty easily, though you do have to be very careful you get it all off or then next pen goes OOR
Cheers,
Dave...but together with the coffee civility flowed back into him
Patrick O'Brian, Treason's Harbour
-
24th August 2011, 06:43 PM #4
Thanks Neil
I will do a search although the ones I just received should last for a while.
Greg
-
24th August 2011, 11:40 PM #5
Trimming/cutting the CA at the ends does damage them eventually, mine normally only last 10-15 pens before I have to redo the angled parts, then eventually they get too short . I am a bit agressive though
Neil____________________________________________Every day presents an opportunity to learn something new
-
25th August 2011, 08:51 AM #6
After a suggestion here by Simomatra (I think) I've been making mine out of those plastic chopping boards
Just turn to a cone shape and one size fits all.
They work wellregards
Nick
veni, vidi, tornavi
Without wood it's just ...
-
27th August 2011, 12:23 PM #7
I tried out the Eliminator bushes shown in the photos earlier in the thread. They are brilliant. I put CA on 6 pen sets and not one of the tubes stuck to the bushes. I didn't have to cut the CA after it dried, the bushes simply came out. This is miles better than trying to put CA on with metal bushes on the mandrel.
Similar Threads
-
Cones instead of bushes.. Yes or No?
By munruben in forum WOODTURNING - PEN TURNINGReplies: 13Last Post: 7th March 2011, 01:16 PM -
J R Bushes
By Pasho in forum WOODTURNING - PEN TURNINGReplies: 4Last Post: 21st January 2009, 11:56 PM -
Teflon bushes for final sanding/finishing/polishing
By dai sensei in forum WOODTURNING - PEN TURNINGReplies: 8Last Post: 15th October 2008, 01:42 PM -
New Electrical Bushes
By TeZZaP in forum HAND TOOLS - POWEREDReplies: 19Last Post: 23rd April 2008, 02:23 PM -
Pen Bushes
By mick61 in forum WOODTURNING - PEN TURNINGReplies: 5Last Post: 22nd July 2007, 09:56 AM