Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 18 of 18
Thread: C10 doing well
-
21st July 2009, 10:35 PM #16
I got 30 in from PGS in the USA.
They worked out at $10.30 each landed here in Malanda FNQ.
They were very very very similar to the ones that came with the Ci1.
The radius on the outside was slightly larger.
The ones that came with the Ci1 are square, 2" & 4".
The ones I got have a 6" radius.
They work fine.
See this thread.
https://www.woodworkforums.com/f8/tct-inserts-81452
Cuttersare here.
http://www.pgstools.com/servlet/the-...ing/Categories
I got the 15 x 15 x 2.5Cliff.
If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.
-
21st July 2009 10:35 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
22nd July 2009, 01:13 PM #17GOLD MEMBER
- Join Date
- Jan 2007
- Location
- Adelaide
- Posts
- 2,794
Yes Cliff, I remember that thread well, it's the one that started my tool making foray. But those are the square cutters, and I am quite happy with the Leuco ones. I was specifically asking about the $25 round ones sold retail by Vermec. Leuco does not have them (when I looked six months ago, I might try to find a moment to check again) and I was hoping somebody had found a bulk supplier like you have for the square ones.
-
22nd July 2009, 10:50 PM #18
Rioght... wiff ya now.
Cliff.
If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.