Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
Thread: Carbatec sanding discs.
-
25th October 2004, 08:33 PM #1
Carbatec sanding discs.
i am going to get a power sanding disc and i was wondering how good the carbatec hook & loop paper is? I was going to buy a 50mm disc and then i could cut 8 discs from a sheet for $1.50 so the discs will be about 20c each.
How much better is the ubeaut paper? it is $1 a disc for 75mm. does it really last that much longer?
-
25th October 2004 08:33 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
25th October 2004, 08:42 PM #2Hewer of wood
- Join Date
- Jan 2002
- Location
- Melbourne, Aus.
- Age
- 71
- Posts
- 12,746
I use the Carba-tec hook and loop sandpaper; good results, cheap.
I make my own discs with a punch made from a length of two inch exhaust pipe sharpened on the inside edge. So every now and again I spend a soothing half hour punching the ***** out of sheets of paper. And the bits left over can be used for the 1" sanding pads.
-
25th October 2004, 09:06 PM #321 with 26 years experience
- Join Date
- May 2004
- Location
- Sunshine Coast Queensland
- Age
- 53
- Posts
- 1,401
Hei Guys,
I use one of these although to be honest I bought some disks when I got the sander and hadn't thought about cutting my own sanding pads from larger pads - the pipe punch sounds like a great idea earn, but how does the car sound
Cheers
Paul
-
26th October 2004, 12:17 AM #4
does it really last that much longer?
One simple answer YEP !!!!!!Jim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!
-
26th October 2004, 08:26 AM #5Hewer of wood
- Join Date
- Jan 2002
- Location
- Melbourne, Aus.
- Age
- 71
- Posts
- 12,746
Originally Posted by smidsy
-
26th October 2004, 09:27 PM #6Originally Posted by Jim Carroll
-
27th October 2004, 08:40 AM #7
At the moment Mr U only sells them in the 75mm discs.
Jim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!