Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 15
Thread: CBN by VicMarc
-
21st December 2014, 10:16 PM #1
CBN by VicMarc
Just a quickie for some feed back from anyone who has tried the VicMarc CBN.
How do you like the extra grit on the side of the wheel?
Have you been able to compare this against any other CBN?
Not sure if Jim has got the new stock in, he was going to have it my Christmas but been so bust with family matters I have not got back to him.
Oh what grit does every one suggest?
Dave the turning cowboy
turning wood into art
-
21st December 2014 10:16 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
22nd December 2014, 08:36 AM #2SENIOR MEMBER
- Join Date
- Dec 2013
- Location
- Mt Waverley Vic 3149
- Age
- 81
- Posts
- 679
-
22nd December 2014, 09:28 AM #3
Vicmarc Grinders & CBN wheels
Dave we have stock of the wheels
Vicmarc Grinders & CBN Wheels
Most guys dont really need the side of the wheel for their turning tools.
It will be the hand tool guys who want to use the side for flattening the back of the chisels etc.Jim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!
-
22nd December 2014, 09:52 AM #4GOLD MEMBER
- Join Date
- Apr 2012
- Location
- Sydney
- Posts
- 1,503
What is the difference between the Woodcut wheel and the Vicmarc wheel other than the size of the side? Are they constructed the same?
-
22nd December 2014, 10:43 AM #5.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,794
I'm not convinced that flattening the back of a chisel this way would work all that well and being quite fast cutting could easily gouge a chisel back.
A flat side coating is likely to be more useful for touching up cutters for a metalworking lathe or mill, and for drill sharpening although I am really pleased with how well the front of a CBN wheel does the job on twist drills.
For carbide tipped tools, my cheapo solution has been to put an $8 6" diamond lapping wheel on the side of the CBN wheel like this.
I did think about using an 8" diamond wheel but was worried it would interfere with the CBN wheel
The diamond wheel is a 170 grit and being only 1.2mm thick is backed by an 100 mm diameter, 12mm thick steel plate.
The grinder is a 3/4HP 3phase with variable speed drive.
I try not to blame tools for my problems in the shed but my twist drill sharpening ability seems to have improved markedly since I started sharpening with a JC CBN wheel. Maybe it's because my CBN wheel is smoother or because I'm running it at around 40 (instead of 50 Hz) or the way it grinds where very little pressure seems to be required to grind HSS. It's probably a result of all of these things which gives one a bit of confidence which then feeds of itself..
-
22nd December 2014, 10:55 AM #6Retired
- Join Date
- May 2012
- Location
- Canberra
- Posts
- 1,820
I'm a novice and a hack, but I find the 180 gives me fantastic results for the lathe chisels.
I have both the 80 and 180 CBNs on a standard 8" grinder (no variable speed). The 80 is too aggressive for my skill level ATM, but the 180 gives smooth predictable results.
I've found that over time the wheels have performed better. They "felt" rough and bouncy/tingy (ting ting ting) for a while, but thats settling out and the sharpenings are really nice and smooth.
My woodfasts don't have the side sharpening, but I do like BobLs implementation. Perhaps he will advise where such a wheel was obtained???
Wheels were obtained from CWS.
-
22nd December 2014, 11:51 AM #7.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,794
Flat lapidary diamond wheels can be obtained from many sources - I got mine from SWMBO who keeps a handy range of grits on hand for her glass jewellery activities.
She got them from http://www.thk.hk/online-cart.php?cid=36&sid=39
BTW it's not recommended to use HSS on diamond, or carbide on CBN wheels.
At $8 a pop for the diamond wheels I don't care if I stuff one up on HSS, but the CBN wheel does not get touched by carbide.
-
22nd December 2014, 12:56 PM #8
BobL ... Love the the idea of a diamond wheel on the side of the CBN.
I am thinking 180 as 80 does not seem to be needed.
Jim - thanks for the update, I should have called again. Now to work out how to raise the said $$$. Family matters have seriously drained the coffers. What is the price for an 8" in widest wheel. NOt sure if you are getting these in a 25mm and a 40mm?
Dave the turning cowboy
turning wood into art
-
22nd December 2014, 01:20 PM #9.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,794
-
22nd December 2014, 03:28 PM #10
It seems 80 grit CBN is used more for shaping. Shaping only needs to be do e once in theory. Sharpening is frequent so thinking I'll go for a 180 grit
Dave
The Turning Cowboy
-
22nd December 2014, 04:33 PM #11
The Woodcut CBN wheels come in a variety of sizes and widths,
The Vicmarc CBN wheels are 40mm wide
The 80g is generally used for reshaping as the 180g can be slow for some people.
Yes you reshape more often than you think, the pointy end always lands first.Jim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!
-
22nd December 2014, 04:36 PM #12
CBN by VicMarc
What drop a chisel. Never! I'm too tight and poor to drop a chisel lol
Good thing I have 3" of sawdust on my floor. I think I'll go the Vicmarc. If I click the link do I get the price .... Ok I'll sit down first.
Dave
The Turning Cowboy
-
22nd December 2014, 04:42 PM #13
Id like one of everything on that Vicmarc link.
I noticed that while the jigs were interchangeable that one would fowl do to a pin or something in the way when moved left to right side of grinder. Do you know if they modified this. Also love to see the gouge jig come with indexing. I know I can mark it myself. Just saying would be nice to have it from the factory.
Dave
The Turning Cowboy
-
22nd December 2014, 05:29 PM #14
I've got the Vicmarc slow speed grinder and an 80 CBN wheel. I find the finish of the wheel to be pretty good but I'm not sure what I would use the side for. The cut is quite aggressive when new but does smooth out and the wheels are HEAVY! Takes a while for the grinder to wind up and slow down.
-
22nd December 2014, 05:35 PM #15
I have carpentry chisels and planer blades so possible I might go a flat grind instead of a hollow grind
Dave
The Turning Cowboy
Similar Threads
-
Vicmarc VL 100
By Dodgyboy in forum WOODTURNING - GENERALReplies: 6Last Post: 5th June 2014, 07:40 AM -
new vicmarc
By hughie in forum WOODTURNING - GENERALReplies: 26Last Post: 8th May 2013, 01:18 PM -
Vicmarc VL 150 SM EVS
By Willy Nelson in forum WOODTURNING - GENERALReplies: 0Last Post: 26th February 2012, 10:57 PM -
Vicmarc 145 ???
By Little Festo in forum WOODTURNING - GENERALReplies: 2Last Post: 28th October 2005, 09:38 AM