Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: chuck adaptor question
-
17th February 2023, 09:22 AM #1New Member
- Join Date
- Jun 2021
- Location
- Melbourne
- Age
- 42
- Posts
- 7
chuck adaptor question
Hi woodturners,
I'm just getting into turning, I've picked up an old wood lathe I think australian made from 1950s.
I found an an old nova chuck, so old the thread is different from new nova chucks!
I need an adaptor between lathe and chuck that I just cant find on the interwebs-
lathe is 1inch 12TPI and needs to match up with the old nova chuck which is 1 3/8inch 8 TPI.
A metal machining shop wants a 3d cad drawing of the adaptor to make which is a bit difficult.
I might just give up on chuck and buy a new chuck that will fit but if you have any ideas that would help me I'd appreciate it.
-
17th February 2023 09:22 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
17th February 2023, 11:31 AM #2
Similar Threads
-
chuck use question
By davefrommt in forum WOODTURNING - GENERALReplies: 11Last Post: 9th October 2022, 05:42 PM -
ER 32 chuck question
By morrisman in forum METALWORK FORUMReplies: 4Last Post: 24th October 2011, 05:56 PM -
chuck adaptor
By bobsreturn2003 in forum WOODTURNING - GENERALReplies: 5Last Post: 13th October 2010, 04:49 PM -
Chuck Question
By lubbing5cherubs in forum WOODTURNING - GENERALReplies: 7Last Post: 6th June 2006, 08:08 PM