Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Chuck for Elu DB180
-
18th November 2021, 09:41 AM #1New Member
- Join Date
- Nov 2021
- Location
- Franklin, Tasmania
- Age
- 69
- Posts
- 1
Chuck for Elu DB180
I have an Elu DB180 wood lathe and am looking for a chuck for this. Does anyone know if there are any and if so where I can find one?
Thanks in advance for any replies.
Cheers,
Willem
-
18th November 2021 09:41 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
18th November 2021, 03:22 PM #2Senior Member
- Join Date
- Jul 2019
- Location
- Lke Macquarie NSW
- Age
- 76
- Posts
- 134
Need to check the head spindle thread size - think it should be M18 X 2.5. It might be possible to get a chuck insert to fit in which case you could look at any scroll chuck with a suitable insert. 100mm chucks start at around $250 and an insert maybe $30-50.
-
18th November 2021, 03:35 PM #3
The Vicmarc VM100 chuck will fit this lathe, as indicated you also need the M18x2.5mm insert. There is a special one for the Elu lathe that has a hub on the back as the straight back one wont work .CWS Store - Vicmarc VM100 Scroll Chuck
Jim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!
-
19th November 2021, 08:43 AM #4
~
Also, for other chucks...
Nova Insert suit Nova Chucks 18mm x 2.5mm Pitch | Carbatec
Vermec Engineering... Chuck InsertsStay sharp and stay safe!
Neil
Similar Threads
-
Repairing a chuck/replacing a chuck/register frustrations!
By MWF FEED in forum THE HERCUS AREAReplies: 0Last Post: 18th June 2021, 10:00 AM -
N.S.W. Keyed Jacobs style chuck + JT6 arbor + keyless chuck
By Ruddy in forum WOODWORK - Tools & MachineryReplies: 2Last Post: 15th September 2020, 07:17 PM -
ELu DB180
By j&j in forum WOODTURNING - GENERALReplies: 14Last Post: 27th April 2013, 10:44 PM