Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
Thread: Chuck Question
-
2nd June 2006, 06:23 PM #1
Chuck Question
HI I m wondering can you help me out when purchasing a chuck and arbour what is the size I need to suit a leda MC_1018? I noticed they have 1mt and 2mt but not sure which one I need to suit my lathe? I have looked in the book but I can't find that out. Secondly I am interested in getting the Nova G3 scroll chuck what thread size would that be? Is this an all rounder good one to start on? Any advice?
thanks Toni
-
2nd June 2006 06:23 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
2nd June 2006, 06:36 PM #2
My advice - ask the shop. I would call Jim Carroll and he will probably know the answers (as well as be able to sell you what you need) - but I suspect that the morse taper would be No. 2 - it usually is these days.
<Insert witty remark here>
-
2nd June 2006, 06:42 PM #3Originally Posted by CameronPotter
bye Toni
-
2nd June 2006, 06:48 PM #4
Fair enough. I know how that goes...
<Insert witty remark here>
-
2nd June 2006, 06:53 PM #5Originally Posted by lubbing5cherubsCheers
Jeremy
If it were done when 'tis done, then 'twere well it were done quickly
-
2nd June 2006, 09:52 PM #6Originally Posted by jmk89
Toni
-
6th June 2006, 06:48 PM #7
Toni the thread is a 1"x10 and the taper is a 2mt.
Jim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!
-
6th June 2006, 08:08 PM #8
There you go - look at that. Got an answer from him anyway... Must be something about the "spare cash".
<Insert witty remark here>
Similar Threads
-
jacobs chuck question
By Jenny Brandis in forum WOODTURNING - GENERALReplies: 13Last Post: 31st May 2006, 08:40 AM -
Supernova2 Chuck Question
By OGYT in forum WOODTURNING - GENERALReplies: 3Last Post: 22nd May 2006, 06:35 PM -
Two-part Question
By Rodgera in forum WOODIES JOKESReplies: 1Last Post: 12th May 2006, 07:17 PM -
Help with chuck "wobble"...
By Skew ChiDAMN!! in forum WOODTURNING - GENERALReplies: 28Last Post: 31st July 2005, 10:19 PM -
Nova Compac chuck
By dawallace45 in forum WOODTURNING - GENERALReplies: 8Last Post: 6th June 2004, 11:28 PM