Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: chuck making weird noise????
-
2nd August 2008, 02:53 PM #1
chuck making weird noise????
Hi I just finished making a bowl. Turned the lathe speed downs to do the sanding. Well the chuck as I turn it around by hands sounds like there is like a ball bearing rolling around could this be the case? Is it safe to continue? Do you know what it might be. Hubby sick in bed so I rather not disturb him if I can get some help.
Sorry I just stopped to find out if I can Does anyone know?
Toni
-
2nd August 2008 02:53 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
2nd August 2008, 03:20 PM #2
Hi Toni,
What make and model of chuck is it????Russell (aka Mulgabill)
"It is as it is"
-
2nd August 2008, 06:05 PM #3
NOVA G3
Toni
-
2nd August 2008, 06:27 PM #4
Hi Toni,
There is a large nut in the back of the chuck called the insert.
It is locked in place with a small grub screw.
I the grub screw comes loose, the insert will loosen and rattle.
Tighten the insert, and then tighten the grub screwJohn
-
2nd August 2008, 07:21 PM #5
Thanks John it was one of the jaws screws come out rolling around inside so I have managed to fix it without hubby so that was great
Toni
-
2nd August 2008, 09:15 PM #6
Similar Threads
-
Weird Piece
By DIY DAN in forum WOODWORK - GENERALReplies: 12Last Post: 13th February 2007, 11:33 PM -
Weird Al Yankovic
By scooter in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 4Last Post: 21st November 2006, 03:13 PM -
Wasn't that weird?
By Bleedin Thumb in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 21Last Post: 6th September 2006, 04:40 PM -
Which beginners chuck should a woodchuck chuck
By dazzler in forum WOODTURNING - GENERALReplies: 16Last Post: 2nd July 2006, 10:58 PM