Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: circle jig
-
30th November 2013, 08:39 PM #1Senior Member
- Join Date
- Mar 2011
- Location
- Carrum Downs
- Posts
- 174
circle jig
so i made a circle cutting jig for my bandsaw to rough cut my bowl blanks. was just wondering what is the best size blade. i bought the smallest one it worked very well but then it broke the blade, so im not sure if it was the blade was to small or it was me???
-
30th November 2013 08:39 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
30th November 2013, 09:04 PM #2Retired
- Join Date
- May 1999
- Location
- Tooradin,Victoria,Australia
- Age
- 73
- Posts
- 11,918
I use a 3/8 3 skip tooth for nearly everything. Peninsula Saw Sharpening in Carrum Downs is where I get them.
-
30th November 2013, 11:00 PM #3
Like , 3/8 3tpi blade with the back of the blade dressed to ease the sharp corners.
I have to make another circle cutting jig, now for the new Hammer.Pat
Work is a necessary evil to be avoided. Mark Twain
-
7th December 2013, 09:58 AM #4Senior Member
- Join Date
- Feb 2010
- Location
- Eugene, OR USA
- Posts
- 322
Well, I think a 1/2 inch blade will cut a 5 inch diameter circle pretty easily. Blade thickness is important as well, and I prefer thicker, which I think is 0.035, but am not sure. I don't know decimals very well. My local bandsaw blade maker asked me what I was cutting and he told me. I do use bimetal blades that are made for cutting wood, and especially green wood. They need some set to the teeth to clear out the dust.
robo hippy
Similar Threads
-
band saw circle jig
By oreos40 in forum WOODTURNING - GENERALReplies: 0Last Post: 21st August 2012, 11:50 AM -
Circle Jig
By chrapladm in forum HAND TOOLS - POWEREDReplies: 5Last Post: 21st September 2010, 01:59 PM -
Circle cutter
By Andy Mac in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 3Last Post: 11th August 2009, 08:28 AM -
Circle Turner
By damienhazo in forum ROUTER JIGSReplies: 1Last Post: 8th October 2006, 09:03 PM -
circle cutting jig
By Big Mac in forum BANDSAWSReplies: 2Last Post: 8th June 2006, 08:07 PM