Thanks Thanks:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 5 of 5
  1. #1
    Join Date
    Sep 2008
    Location
    North Carolina, USA
    Posts
    2,327

    Default Commercial Bowl Blank Cracking

    I got a piece of ambrosia maple 200 X 200 X 125mm from an estate about 2 years ago. It had been dipped in wax and has been in my dirt floored basement shop on a shelf since. From the dirt imbedded in the wax the previous owner had it for years.

    Two nights ago I roughed the outside and left it until tonight. I noticed three hair line cracks radiating from the bottom on the two end grain sides. The center of the log would be about a 30mm below the bottom of the bowl.

    After hollowing, with a wall thickness of about 18mm, I noticed the cracks had opened up a bit more.

    I thought the expensive wax coated blanks were not supposed to crack.

    I will set this one aside for a couple of weeks to do whatever it pleases, then wedge open the cracks, run in some CA, put a big hose clamp around it and tighten. Then I'll finish.

    Comments please.
    So much timber, so little time.

    Paul

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Apr 2005
    Location
    Nerang Queensland
    Age
    66
    Posts
    10,766

    Default

    Wax coated blanks dry more slowly, which helps avoid cracking, but some wood just want to crack and can't be avoided only minimised.
    Neil
    ____________________________________________
    Every day presents an opportunity to learn something new

  4. #3
    Join Date
    Feb 2009
    Location
    Bristol, UK
    Age
    66
    Posts
    1,540

    Default

    Was the whole thing wax coated? It seems to read that way from your posting. That might have retained a degree of moisture in the blank until you cut it then the last moisture escapes and causes the cracking.

    Shame - it sounds like a lovely piece of wood.
    Dragonfly
    No-one suspects the dragonfly!

  5. #4
    Join Date
    Sep 2008
    Location
    North Carolina, USA
    Posts
    2,327

    Default

    Quote Originally Posted by dr4g0nfly View Post
    Was the whole thing wax coated? It seems to read that way from your posting. That might have retained a degree of moisture in the blank until you cut it then the last moisture escapes and causes the cracking.

    Shame - it sounds like a lovely piece of wood.
    As the basement is somewhat damp, the blank could have retained moisture or picked up some. Recent weather is dry and windy and I am running the wood boiler on the other side of the basement. So the change in humidity could have caused the cracking.

    Almost all of the expensive blanks I see in stores are wax dipped. Mostly off shore timber.

    The blank will not be wasted. I'll glue up the cracks and finish it, but let it sit around in the house for a month or two before putting it in the shop. Just in case it wants to do some more moving.
    So much timber, so little time.

    Paul

  6. #5
    Join Date
    Jul 2005
    Location
    Flinders Shellharbour
    Posts
    5,689

    Default

    As the basement is somewhat damp, the blank could have retained moisture or picked up some. Recent weather is dry and windy and I am running the wood boiler on the other side of the basement. So the change in humidity could have caused the cracking.

    Almost all of the expensive blanks I see in stores are wax dipped. Mostly off shore timber.

    The blank will not be wasted. I'll glue up the cracks and finish it, but let it sit around in the house for a month or two before putting it in the shop. Just in case it wants to do some more moving.

    Hmm for me If I get a fully coated blank and that's rare. I will scrap some of the wax off in a grind pattern so the coating look slike a checker board then let it dry futher
    Inspiration exists, but it has to find you working. — Pablo Picasso


Similar Threads

  1. My bowl blank
    By Nai84 in forum WOODTURNING - GENERAL
    Replies: 29
    Last Post: 28th October 2010, 09:43 PM
  2. Ash Bowl Blank
    By bowl-basher in forum WOODTURNING - GENERAL
    Replies: 8
    Last Post: 13th April 2010, 01:28 PM
  3. decent sized bowl blank
    By hughie in forum WOODTURNING - GENERAL
    Replies: 17
    Last Post: 29th January 2010, 10:39 AM
  4. Lidded Bowl from an Odd-Shaped Blank
    By joe greiner in forum WOODTURNING - GENERAL
    Replies: 15
    Last Post: 1st January 2009, 01:19 AM
  5. Another way to mount a bowl blank.
    By Skew ChiDAMN!! in forum WOODTURNING - GENERAL
    Replies: 12
    Last Post: 23rd November 2006, 03:11 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •