Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
Thread: Coolabah Burls
-
7th October 2009, 10:30 PM #1
Coolabah Burls
Picked up a few nice Coolabah burls form Mal Ward the other day. The smaller burls were easy enough but I had a 20kg piece which even after trimming down to fit on the MC1100 was very heavy and shaping up to be launched into orbit when turned on. I have a large old school Variac speed controler so put that in line and slowed the lathe down as slow as I could without stalling the lathe and just took my time. small one is about 170mm diameter, 230, 250 and the lager one would be around 310ish. finish is home made Danish. Have to catch up with him to get some more.
-
7th October 2009 10:30 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
7th October 2009, 10:35 PM #2Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
They sure are nice burls Claw and the bowls look great!!
Natural edges look good but how many knuckles suffered in the process?
-
7th October 2009, 10:38 PM #3
No wounds at all, kept a very firm grip untill I got them shaped up, they were just a tidg green in the middle which made them not too bad. Wouldn't lilke to do them rock hard.
-
7th October 2009, 11:26 PM #4
very very nice
The biggest coolabah burl I have seen is a pen blank so I'm very jealousCheers Rum Pig
It is easier to ask for forgiveness than permission.
-
8th October 2009, 01:35 AM #5
Claw, beautiful wood, the third is my favorite, as I don't like much natural edge bowls, but that's my problem.
Anyway great work!!
Ad
-
8th October 2009, 07:23 AM #6
Thank guys, I will be chasing Mal today for some more but I have to catch him before he takes them all to the Melbourne show.
Ad, I get torn between a nice smooth edge and a natural edge. Two of these are commissions and the large one is a gift, the lady who wants the commissions originaly wanted two natural edge bowls but I will give her the choice of the turned edge as well.
RP, you could get Mal to post you one I'm sure.
-
8th October 2009, 12:14 PM #7
Good lookin' wood, that coolabah, CH...as for the turnings, ahhhhhh just kidding...you get an A
Cheers,
Ed
Do something that is stupid and fun today, then run like hell !!!
-
8th October 2009, 07:43 PM #8
Hi Ed, what a kidder, yes good looking bit of stick. I spoke to Mal but alas I won't be able to get any more for a couple of weeks. Never mind I have a few other things to carry on with. I will post some boxes on a different thread.
Similar Threads
-
Burled Coolabah
By Penpal in forum WOODTURNING - PEN TURNINGReplies: 5Last Post: 22nd January 2009, 09:20 PM -
Coolabah and Mallee Burls Wanted
By scuttle in forum TIMBERReplies: 1Last Post: 24th March 2006, 03:25 PM -
Source for Coolabah
By Peter36 in forum TIMBERReplies: 4Last Post: 20th March 2006, 09:30 PM -
Coolabah Burl to seal
By Chantal in forum FINISHINGReplies: 2Last Post: 5th October 2004, 08:48 PM