Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 10 of 10
-
4th December 2012, 05:47 PM #1
Coral " Flame Tree" any good for turning?
Hello All,
I have just had a tree partially come down in my backyard... took out about 6-7 metres of fence and I got to wondering if it was any good for turning as after spending a whole day cutting and triming what was left I have alot of small logs leftover.
It is what I call a coral tree or I have heard it called a coral flame tree, google it and you'll see what I mean. it is not an illiwarra flame tree.
previously I have been told that the wood is not suitable for construction as its very fibrous in texture and not very strong also it apparently doesnt burn well either as it tends to smoke because its quite a resinous wood... if that makes sense.
anyway I was wondering if anyone had used this wood for turning or am I stuck with just dumping the lot
Steve
-
4th December 2012 05:47 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
4th December 2012, 06:10 PM #2
Dunno. But most people say if its wood it can be turned. Is it pretty grain or anything? What does it look like? Wrong bit of the country for me though.
anne-maria.
Tea Lady
(White with none)
Follow my little workshop/gallery on facebook. things of clay and wood.
-
4th December 2012, 06:57 PM #3
Hello tea lady,
The wood appears pretty uninspiring from the outside, its pretty much a pale white colour with a fiberous texture and not much grain.
according to google... yes I know it is used bt the Hawaiian peoples to make small toys and implements as well as dug-out canoes
I think I may have to just give it a go on the lathe and see what comes out but I was curious if anyone had done anything with this type of wood ... and I'm pretty sure I'm not going to make a canoe
Steve
-
4th December 2012, 09:14 PM #4
I saw some cut down a few years back and while the saying goes any wood can be turned, this may be the execption. I declined to try in any case. I guess soaked in casting resin or something it may be doable or as a one of novelty but that is about it. However there is surely someone who has done it on this forum.
Regards
John
-
4th December 2012, 09:22 PM #5
Is it the red or yellow?
The red is more durable, but both relatively boring for woodturning as far as I am aware. Probably good though for the kids tops and yo-yos coloured with textasNeil____________________________________________Every day presents an opportunity to learn something new
-
4th December 2012, 10:42 PM #6
If it's one of the erythina's like the one on this link, I suspect the timber would be a lot like the bowl I started recently on this thread which is from an Aussie native erythina. Wouldn't be going out of my way to get any more if that sums it up for you
-
4th December 2012, 10:46 PM #7
Short answer.... trash it.
JimSometimes in the daily challenges that life gives us, we miss what is really important...
-
4th December 2012, 10:47 PM #8
White boring fibrous timber that splits badly as it dries out... junk.
Cliff.
If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.
-
5th December 2012, 11:15 AM #9
Oh well.
anne-maria.
Tea Lady
(White with none)
Follow my little workshop/gallery on facebook. things of clay and wood.
-
6th December 2012, 02:39 PM #10
Thanks everyone for their replies.... I guess I kinda knew the answer before asking but I had to ask.
Seems like such a shame but at least I'll get a lot of woodchips for the garden.
and off to the landfill with whatever I ca't chip.
Steve
Similar Threads
-
Lookin' for a good old "Cone"-style Puller...
By Batpig in forum METALWORK FORUMReplies: 6Last Post: 23rd July 2012, 10:33 AM -
"Good" and "Cheap" CMS ? - Yes!
By Grandad-5 in forum HAND TOOLS - POWEREDReplies: 24Last Post: 2nd January 2012, 06:49 PM -
Aussie P&N turning chisels " Any good"
By SawDustSniffer in forum WOODTURNING - GENERALReplies: 23Last Post: 24th January 2007, 09:02 PM -
Good "free" turning wood?
By type82e in forum WOODTURNING - GENERALReplies: 3Last Post: 22nd May 2004, 02:23 PM