Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
Thread: Cranky grain and the skew chisel
-
17th June 2009, 06:15 PM #1
Cranky grain and the skew chisel
When spindle turning, I use the skew chisel as much as possible. This results in a nice, clean cut requiring little sanding however on timber such as blackwood and others especially with twisted grain, I sometines get tearout and I'll use a gouge or a scraper. Is there a technique that can be used with the skew that will allow you to work with grain that is not straight?
-
17th June 2009 06:15 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
17th June 2009, 06:25 PM #2Retired
- Join Date
- May 1999
- Location
- Tooradin,Victoria,Australia
- Age
- 73
- Posts
- 11,918
You should come down this weekend to this https://www.woodworkforums.com/f8/sharp-weekend-96938 A lot of your questions would be answered and you might even get some tuition.
-
17th June 2009, 06:35 PM #3regards
David
"Tell him he's dreamin.""How's the serenity" (from "The Castle")
-
17th June 2009, 06:41 PM #4
Plenty of info here Tiger. And yeah, c'mon down to 's you'll meet a great bunch of people and learn a hell of a lot as well .
To grow old is inevitable.... To grow up is optional
Confidence, the feeling you have before you fully understand the situation.
What could possibly go wrong.
-
18th June 2009, 09:40 PM #5Hewer of wood
- Join Date
- Jan 2002
- Location
- Melbourne, Aus.
- Age
- 71
- Posts
- 12,746
You can try a fine peeling cut but your skew will need to be verrrry sharp. Burr honed off.
Cheers, Ern
-
18th June 2009, 10:04 PM #6China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 4,475
As said above your skew needs to be very sharp
-
19th June 2009, 05:30 PM #7
Thanks, Grumpy, good info in that thread.
Thanks to others as well, will try and get down to Tooradin on one of the afternoons once I move a few things around. What is the exact address?
-
19th June 2009, 05:32 PM #8
Similar Threads
-
Planning Cranky Grain with Oil
By thumbsucker in forum HAND TOOLS - UNPOWEREDReplies: 9Last Post: 26th October 2007, 03:43 PM -
radius on skew chisel
By robatman in forum WOODTURNING - GENERALReplies: 11Last Post: 29th July 2006, 11:08 PM -
skew chisel
By routermaniac in forum WOODTURNING - GENERALReplies: 29Last Post: 6th May 2005, 03:22 PM