Results 271 to 285 of 378
Thread: Critique pictures. Read 1st post
-
20th May 2009, 12:50 PM #271Banned
- Join Date
- Jun 2007
- Location
- Otautahi , Te Wa'hi Pounamu ( The Mainland) , NZ
- Age
- 69
- Posts
- 2,114
-
20th May 2009 12:50 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
6th July 2009, 05:39 PM #272
Redgum Bowl from Railway sleeper
HI
I got out in the shed today, yes on the stubby (I luv my STUBBY) and made a bowl from one of the peices of railway sleeper that jumped into the trailer on the way home from Jeffersons. I took all evasive action (as can be attested to by Skew) but i still ended up with a full sleeper and a couple of extra offcuts.
So here is the first bowl.
Trying new shape i havent tried before (straight lines)
Go for it it's in the critique thread awaiting comments
Sanded to 1200 then EEE and Glow.
Cheersregards
David
"Tell him he's dreamin.""How's the serenity" (from "The Castle")
-
6th July 2009, 06:11 PM #273Hewer of wood
- Join Date
- Jan 2002
- Location
- Melbourne, Aus.
- Age
- 71
- Posts
- 12,746
Nice bit of wood David.
Surprised it wasn't full of cracks, or gravel. Or did you pick it out so as not to chip the Stubby's duco? ;-}
That's a good shape to turn: plain sailing.Cheers, Ern
-
6th July 2009, 06:21 PM #274
Ern hopefully Skew will come in here but they are replacing all the sleepres from Wodonga to about Euroa with concrete ones and some of those being removed have not been there that long.
I started to turn it round but it was pretty hard so took it off the lathe and cut a round blank on the bandsaw - it cut it easy and didnt seem to blunten the blade so i think it is pretty clean really.
Do you want a bit tomorrow when i pick up the chisel?
Cheersregards
David
"Tell him he's dreamin.""How's the serenity" (from "The Castle")
-
6th July 2009, 06:33 PM #275Hewer of wood
- Join Date
- Jan 2002
- Location
- Melbourne, Aus.
- Age
- 71
- Posts
- 12,746
Yeah, I noticed the sleeper work last time driving down the Fume.
Must be getting slow as I didn't think of 'scientific whaling'.
I used to live near a suburban line and sampled some old sleepers for firewood. Heavy work.
And thanks, I wouldn't mind a blank. Swap you for a lump of Red Oak.Cheers, Ern
-
6th July 2009, 08:09 PM #276
Some of the sleepers were in near new condition but I'd still go over 'em with the Mk I eyeball before putting 'em through the bandsaw or lathe, 'cos it only takes one stone in the wrong spot... but apart from that I wouldn't be worried. (Which is saying something, considering how many BS blades I've ruined on old sleepers.)
I just remembered that a nice fiddle-backed goblety sized piece beached itself on the trailer as we drove past, but I forgot to claim salvage rights when David dropped me off.
- Andy Mc
-
6th July 2009, 08:31 PM #277
-
7th July 2009, 07:43 PM #278
-
7th July 2009, 08:06 PM #279
I hate giving critiques, but I guess I can force myself this time. To my eye, for the width of the rim the foot is too wide and it's too tall, making the sides too steep...
It's a form I like "in general" but with straight sides you really need to get the proportions right.
Personally, I like the foot to be about 1/3 the overall diameter & the height to be 2/3 of the foot. This gives a side slope of over 45° which I reckon displays the grain nicely on the interior. With straight, sloped sides that's really the only place you can see the grain when in normal use.
- Andy Mc
-
7th July 2009, 09:46 PM #280
...Skew beat me to it, and said it eloquently.
Cheers,
Ed
Do something that is stupid and fun today, then run like hell !!!
-
7th July 2009, 11:53 PM #281
My twp cents worth would be that you've softened the edges a bit much again. Which has kinda given the illusion that the form is a bit wishy washy. Straight sides are such a definite choice that in my mind the edges need to also be a bit more definate. Not sure about the transition from the sides to the bottom on the inside either.
I like the wood but......... and the quality of the finish is great.anne-maria.
Tea Lady
(White with none)
Follow my little workshop/gallery on facebook. things of clay and wood.
-
8th July 2009, 10:47 AM #282
After seeing some of the work already produced here I was a bit nervous of posting my turnings So what the heck here goes.Not been turning very long since about Sept last year. So any feed back on this bowl would be appreciated
Attachment 110126
Attachment 110127
-
8th July 2009, 11:36 AM #283
Hi DiggerD ....welcome to the forum
Well, thats a shape that's not often seen, but you have handled it well. The transitions from base to sides to rim appear in proportion and flowing, but there is something that is like a half bubble off, but can't quite figure out what it could be
all in all well done I give it an A-Cheers,
Ed
Do something that is stupid and fun today, then run like hell !!!
-
8th July 2009, 12:01 PM #284
Hi Diggerd. What a nice bowl. I can really imagine a nice salad in it. Lovely flowing shape.
anne-maria.
Tea Lady
(White with none)
Follow my little workshop/gallery on facebook. things of clay and wood.
-
8th July 2009, 02:53 PM #285Retired
- Join Date
- May 1999
- Location
- Tooradin,Victoria,Australia
- Age
- 73
- Posts
- 11,918
I agree with Ed. I think that the transition to the rim could have started just a little lower to soften the curve.
Similar Threads
-
Profile Pictures
By Driver in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACKReplies: 15Last Post: 2nd June 2006, 06:21 PM -
please help me
By erin in forum TIMBERReplies: 14Last Post: 12th May 2006, 06:43 PM -
READ THIS POST
By ubeaut in forum WOODTURNING - GENERALReplies: 2Last Post: 14th November 1999, 08:12 AM -
READ THIS POST
By ubeaut in forum ANNOUNCEMENTSReplies: 0Last Post: 13th November 1999, 12:52 AM -
READ THIS POST
By ubeaut in forum FINISHINGReplies: 0Last Post: 13th November 1999, 12:51 AM