Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 14 of 14
-
13th July 2014, 09:05 AM #1
doing the hard way, I should live in FNQ
This has been a pain from start to finish, mainly my fault as I couldnt decide which way to go dark-light or whatever. I coloured the outside with Burgundy spirit stain, didnt like it so sanded it off did the same for the inside and removed it only to put it back. Settled on dark inside and rim and the foot has been done as well. Add to that enumerable interruptions and cold weather with the WOP not going off etc . The joys of a unheated tin shed for a workshop. Probably brought this all on myself as I am trying to finish several pieces at once with the weather being a total pain, low temps and all.
Burgundy spirit stain topped off with Satin WOP 7x5" in Silky Oak and your comments are welcomeInspiration exists, but it has to find you working. — Pablo Picasso
-
13th July 2014 09:05 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
13th July 2014, 09:16 AM #2
Hughie, even living in FNQ has its trials & tribulations and Minwax WOP has its dramas here too. I have found some timbers just do not like WOP so it is hard enough to build coats in normal weather conditions. I found it tended to wick towards the sharp edges and took forever to dry on those edges in cool or moist conditions. Your piece has lots of those edges and (southern) silky oak is not the friendliest for WOP.
Very nice piece though & lovely neat spirals.
-
13th July 2014, 09:52 AM #3
WOW!!! Another beautiful job Hughie.
Do you have any duds? Come on tell the truth now, is there a pile in the back yard of ones that never made it? Just kidding. your results that we see here are a glimpse of your abilities and perseverance! Your family must be thrilled to receive them as presentsJust do it!
Kind regards Rod
-
13th July 2014, 10:23 AM #4
Another nice piece.
I think the piece is better to be darker inside as if it was the other way around it would require a more open piece to allow as much light in to avoid the shadows.
-
13th July 2014, 10:53 AM #5GOLD MEMBER
- Join Date
- Sep 2008
- Location
- North Carolina, USA
- Posts
- 2,327
Hughie,
Very nice piece. I like the dark inside.
I too work in an unheated space. I will work in it down to about 5 degrees C. I use tung oil applied on bowls revolving on the lathe. I will apply a light coat, then warm with a hair dryer, buff, repeat. I can get two coats in about 20 minutes, then let it sit overnight.
I'm assuming you apply the WOP off the lathe.
You might want to make a box, maybe from cardboard to try. Have a raised place to set your piece, then warm it with a 40 - 60 watt lamp set inside to get your finish to dry. A hair dryer on low poked in a hole in the bottom with a hole in the top would also work.
I would not leave this unattended, and keep an eye on how warm it gets inside. A dial food service thermometer with the stem poked inside would help.
If that works, a dead dorm room refrigerator with a lamp inside and a few holes drilled in the bottom and top to get air circulation might work.
If you apply WOP while held on the lathe, slowly revolving while applying heat from a hair dryer might work for you.So much timber, so little time.
Paul
-
13th July 2014, 01:00 PM #6
Very nice piece of work Hughie.
Don't know about moving up here, it is pretty cold here too, got down to 18 deg C today...
JimSometimes in the daily challenges that life gives us, we miss what is really important...
-
13th July 2014, 01:10 PM #7
It hit 2' one night here......
Paul thanks for that info I actually do have a cardboard box with small bulb, a bit too small I think. Yes the WOP is applied off lathe.
Chambezio, not too many duds, the secret is to constantly monitor as you go and make whatever changes required. I start out with a clear idea of what I want but nothing is written in stone.
Mobyturns , Yeah WOP has its good points but as you say it aint for everything.
Christos I tried several variations dark /light , light/dark, less dark more dark etc, too many tries and I tend to confuse my selfInspiration exists, but it has to find you working. — Pablo Picasso
-
13th July 2014, 05:05 PM #8
[QUOTE=powderpost;179045nice piece of work Hughie.
Don't know about moving up here, it is pretty cold here too, got down to 18 deg C today...
Jim[/QUOTE]
Hi hughie,
Very nice piece, I like the dark Inside too !
We had a minus 8º a few mornings last
week,,,, those queenslanders would not know
what cold Is....Cheers smiife
-
13th July 2014, 07:07 PM #9
-
13th July 2014, 07:42 PM #10
-
13th July 2014, 08:12 PM #11
[QUOTE=Mobyturns;1790543]When it gets below 20C that's cold - isn't it?
[QUOTE]
Nnaahhh!! We are expecting -5ºin the morning
Toughen up you banana benders!Cheers smiife
-
13th July 2014, 10:44 PM #12
[QUOTE=smiife;1790567][QUOTE=Mobyturns;1790543]When it gets below 20C that's cold - isn't it?
Nnaahhh!! We are expecting -5ºin the morning
Toughen up you banana benders!
-
14th July 2014, 03:24 AM #13Retired
- Join Date
- May 2012
- Location
- Canberra
- Posts
- 1,820
You whimps. It was minus 6 here tonight and I've just come in from the shed....2am. There is a 1/10th degree bar fridge thermometer hanging on the wall next to my beer fridge....minus 3 it read.
I kept warm by sanding six new chairs! Hard work sanding!
Native Canberran with Viking genes almost thought of flipping the heater on
-
15th July 2014, 09:09 PM #14GOLD MEMBER
- Join Date
- Jun 2005
- Location
- Townsville. Tropical Nth Qld.
- Posts
- 1,244
Hughie, not sure about wanting to be in FNQ, but here in NQ we have our own problems. Rains for 3 months then usually no more for the rest of the year, but so far we have picked up some odd showers. Absolute pain trying to spray lacquer finish, one day 80% humidity, next 20%, not fun at all. But that's one of the small sacrifices for living in Paradise.
When I left Paul in North Carolina last year it was - 5 ° C, and that was Autumn, you can keep that, I am going back in his summer next time.
Rgds,
Crocy.
Similar Threads
-
shall I live with it or do it again
By eskimo in forum METALWORK FORUMReplies: 6Last Post: 3rd April 2014, 07:34 AM -
How hard is hard enough for a hardwood floor?
By Robd in forum TIMBERReplies: 7Last Post: 30th January 2012, 06:37 PM -
Telcos: can't live with them, can't live without them
By artme in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 3Last Post: 9th December 2009, 12:52 PM -
Where I used to live. (Nearly)
By Cliff Rogers in forum NON WOODWORKReplies: 5Last Post: 11th June 2008, 07:17 PM -
Hard Hard Wood
By Calm in forum WOODWORK - GENERALReplies: 8Last Post: 30th May 2006, 04:57 PM