Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Dome Sander
-
11th April 2010, 03:08 PM #1
Dome Sander
Dome sander has any one got one or made one ???
I have seen a few home made dome type sanders most have failed miserably after a short period, these have been Velcor style either fitted to a battery drill or hand held system.
I am running a few ideas and decided to do a search WOW check this system out half way down the page is the dome sander Classic Hand Tools Limited - Kirjes Sanding System from Sweden
-
11th April 2010 03:08 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
11th April 2010, 05:54 PM #2
LV have them too
Pat
Work is a necessary evil to be avoided. Mark Twain
-
11th April 2010, 06:26 PM #3
-
11th April 2010, 06:34 PM #4
who is lv pat ? wheelin i bought the compleat system some years ago and its one of the best investments ive ever made .its great for sanding all sorts of things that are round or rounded ,carving,turning,intarsia,chair legs etc the dome one is ok so long as you dont hit sharp eges going the wrong way and the sleeves last quiet awhile .i dropped the motor and broke it some time ago so just bought a cheap small drill press and this does the job \100 bucks compared to 300 you can buy the bits and pieces individually and thal makes it cheaper .i use the small drum and the next size up the most the long one hardly ever ,same as the dome but then again i dont turn.mik used to sell them i think thats macwood now
-
11th April 2010, 06:38 PM #5
Lee Valley is who Pat is mentioning
Thanks sounds like a good investment I am tired of using my fingers I guess
Thanks for the reply
Similar Threads
-
Dome Clock
By ozzie4x4 in forum SCROLLERS FORUMReplies: 0Last Post: 4th May 2009, 11:15 PM -
Re pleated filters and dome fittings
By jazza in forum WOODWORK - GENERALReplies: 6Last Post: 8th February 2009, 09:23 AM -
Where to buy dome nuts?
By wixy in forum WOODWORK - GENERALReplies: 7Last Post: 7th November 2007, 09:39 PM