Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 10 of 10
Thread: Door handles
-
28th August 2013, 07:09 PM #1GOLD MEMBER
- Join Date
- Jan 2013
- Location
- Tasmaniac
- Posts
- 1,470
Door handles
Normally I wouldn't give much thought about door handles. You can buy cheap enough timber ones at the local hardware store, no big deal.
However I was approached by an architect couple about a year ago to have a go at turning some designs they had come up with.
Since then I have made hundreds for them!. They (the architects) are obviously very good at marketing and due to their profession they have a flair for design.
They have developed lots of different designs each with a variety of sizes available. Following pictures are for 1 design that is available in 7 sizes from 50mm dia to 200mm dia. These ones are in Tassie oak however they can be ordered in other timbers as well. I supply them unfinished as the client likes to finish them. For most of the designs I make a pencil gauge and use calipers when needed so that a uniform product is available.
As with turning balusters etc, it can be monotonous work. However there is still the challenge of making each one as well as possible and there is the bonus of getting paid an hourly rate that I'm happy with.
-
28th August 2013 07:09 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
28th August 2013, 07:54 PM #2
Very interesting.
-
29th August 2013, 07:12 PM #3
On a screw?
-
30th August 2013, 08:30 AM #4GOLD MEMBER
- Join Date
- Jan 2013
- Location
- Tasmaniac
- Posts
- 1,470
-
30th August 2013, 08:51 AM #5
Great to see craftsman turned - not production copy lathe stuff.
-
30th August 2013, 08:58 AM #6GOLD MEMBER
- Join Date
- Jun 2010
- Location
- shoalhaven n.s.w
- Posts
- 1,240
wow what a great job to pick up! I'm always a bit wary of architects well one in particular! he claimed he had done all the hard work designing and all I had to do was make it!
they look great what you have made!
-
30th August 2013, 02:03 PM #7GOLD MEMBER
- Join Date
- Jan 2013
- Location
- Tasmaniac
- Posts
- 1,470
Yeah, to be honest I was a bit dubious about the job at first. I told the architect they might be better off contacting an oriental sweatshop to turn them as I would have no chance competing with anything like that. Architect was however not interested in that option as they wanted Aussie timber made in Aussie. All the better for me!.
Working with an architect can have its challenges, some of the designs I have been given have been designed with no knowledge of woodturning and while this can give rise to some interesting designs it can also mean having to make some unusual tooling to be able to make them. On a couple of occasions even outright refusal to make a particular design. However we have a pretty good relationship and usually arrive at a reasonable outcome.
-
31st August 2013, 12:44 AM #8Retired
- Join Date
- May 1999
- Location
- Tooradin,Victoria,Australia
- Age
- 73
- Posts
- 11,918
Working with an architect can have its challenges, some of the designs I have been given have been designed with no knowledge of woodturning and while this can give rise to some interesting designs it can also mean having to make some unusual tooling to be able to make them. On a couple of occasions even outright refusal to make a particular design. However we have a pretty good relationship and usually arrive at a reasonable outcome.
-
31st August 2013, 01:12 PM #9SENIOR MEMBER
- Join Date
- Jul 2001
- Location
- South Australia
- Posts
- 650
A recent job that came my way was for 5 columns.
The blanks were 185mm square and 900 high and laminated out of 25mm blackwood boards.
The drawing showed square cut pommels with a cove cut right next to the square corner.
I managed to talk the architect into moving the cove away from the square cut corners but he/she wouldn't come at a radius on the square corner.
I wasn't game to try and cut the square corners while spinning a 185mm square blank.
I made an adjustment to the price quoted as the square corners had to be cut by hand with a saw before turning.
I still wasn't comfortable with this job, so discretion being the better part of valour, (or you could say I chickened out) I subcontracted to a friend of mine who used to work for Hammersmiths, an old Adelaide turning company.
He has much more experience at this sort of work than I do.
I have done some of his large faceplate work so I figured it was only fair exchange.
He cursed and swore his way through the tear out caused by the multi direction grain of the laminated blackwood.
The blackwood did looked superb when finished.
However the silly part was the columns were to be 2 pack epoxied grey.
Cheers
TimSome days I turns thisaway, somedays I turns thataway and other days I don't give a stuff so I don't turn at all.
-
31st August 2013, 08:38 PM #10
Similar Threads
-
door handles for french doors.
By alwayscurious in forum WOODWORK - GENERALReplies: 5Last Post: 7th December 2009, 02:02 PM -
Crazy Door Handles
By City Kid in forum Links to: WEB SITESReplies: 2Last Post: 12th January 2009, 08:49 AM