Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Dust Masks
-
12th November 2000, 08:48 PM #1
New Member
- Join Date
- Sep 2000
- Posts
- 3
Dust Masks
I've bought the lathe, basic tools, lessons and safety gear.
Unfortunately, as a spectacle wearer for close in work, I have found that wearing both mask and glasses results in fogged glasses.
Very difficult turning something you can't see.
After turning just a few small practice pieces today, I found that the alternative(no mask) isn't a good idea so would value some input from others who may have had the same problem.
ThanksTurning? Love It.
-
12th November 2000 08:48 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
-
12th November 2000, 09:27 PM #2
Drop Bear Master
- Join Date
- Jul 2000
- Location
- Drop Bear Capital of Gippsland (Lang Lang) Vic Australia
- Age
- 74
- Posts
- 6,518
I have a friend in the optical business who sells defogging 'stuff'. It was secret for years but I found out that it was just liquid soap rubbed on the glass and then buffed off. Works like a charm for a day or two then do it again. Washing up liquid will do the job and you don't need much. Failing that try a respirator which ventilates at the sides which should fix the problem. Sounds like you are using a paper mask.
Also try the soap on the bathroom mirror, saves a lot of cuts while shaving.Stupidity kills. Absolute stupidity kills absolutely.
-
13th November 2000, 08:43 PM #3
Intermediate Member
- Join Date
- Jul 2000
- Location
- Brisbane,
- Posts
- 40
If your spectacles are fogging then it means that the seal of your mask is not satisfactory. If you're using disposables, purchase good quality charcoal filled ones with a valve on the front and metal pinch cleat at the nose bridge, otherwise, keep playing with your mask until the seal is right. I'm in the same situation as yourself.
Wish I could afford a ventilated face shield!!!!
------------------
Reply With Quote
