Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: fitting crushgrind
-
19th September 2012, 05:36 PM #1GOLD MEMBER
- Join Date
- Jun 2006
- Location
- Burwood NSW
- Age
- 82
- Posts
- 1,247
fitting crushgrind
G'day
I want to make some grinders using Crushgrind fittings . Some advise grinding the locating lugs off and gluing the fittings in rather than cutting the grove to locate them .
What do most formites do?
Ted
-
19th September 2012 05:36 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
19th September 2012, 08:04 PM #2
Initially when they came out it was easier to trim of the nibs of the sides and glue the mechanism in the housing.
Now with the Robert Sorby relief cutting tool you can cut the groove for the nibs to locate in and this will hold in place for you, certainly easier.Jim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!
-
19th September 2012, 08:06 PM #3
fitting crushgrind
hi ted,
i will be interested in any replies you receive as i made some on the weekend,
filled them with salt & pepper and put them on the table,trouble is the tops keep coming off
so i would like to know the right way to go with them as well.
cheers smiife
-
19th September 2012, 08:10 PM #4Jim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!
-
19th September 2012, 08:15 PM #5
thanks jim ,i will try that
sorry to hijack your post ted
cheers smiife
Similar Threads
-
Crushgrind drilling
By Anodyne in forum WOODTURNING - GENERALReplies: 8Last Post: 24th January 2012, 09:23 AM -
Crushgrind Mechanisms
By CV Turner in forum WOODTURNING - GENERALReplies: 3Last Post: 7th March 2008, 07:55 PM -
Turning CrushGrind Peppermills
By CameronPotter in forum WOODTURNING - GENERALReplies: 4Last Post: 12th April 2006, 12:16 PM -
Crushgrind
By macca2 in forum WOODTURNING - GENERALReplies: 17Last Post: 21st March 2006, 04:51 PM -
Crushgrind Sydney
By macca2 in forum WOODTURNING - GENERALReplies: 4Last Post: 23rd January 2006, 09:11 PM