Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 20
Thread: Forstner bits
-
12th February 2020, 06:44 PM #1SENIOR MEMBER
- Join Date
- Aug 2017
- Location
- Canberra
- Posts
- 587
Forstner bits
Can anyone recommend a decent set of Forstner bits that covers the bigger sizes, 30mm at least but more around 40 50 60 70?
-
12th February 2020 06:44 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
12th February 2020, 07:37 PM #2
Hi BT , I think I got mine from carbatec , but not a set as such just bought them singularly
Hope this helpsCheers smiife
-
12th February 2020, 09:15 PM #3GOLD MEMBER
- Join Date
- Jun 2006
- Location
- Burwood NSW
- Age
- 82
- Posts
- 1,247
I have bought ones about those sizes from Mcjings .
Ted
-
12th February 2020, 09:17 PM #4GOLD MEMBER
- Join Date
- May 2011
- Location
- Albury
- Posts
- 3,034
McJing stock a good range - McJING Online Tools Products Search There was some discussion on here a few months ago and there seemed to be general agreement that carbide tipped bits are good, McJing have them up to 80mm diameter. They get a bit exxy in the larger sizes.
-
13th February 2020, 11:35 AM #5SENIOR MEMBER
- Join Date
- Apr 2007
- Location
- Sydney
- Posts
- 749
Colt Maxicut or Famag Bormax are the bees knees. You will need to order from overseas as I don't think anyone is distributing in Oz. However its well worth it for quality of cut & longevity of the bits.
-
13th February 2020, 09:02 PM #6SENIOR MEMBER
- Join Date
- Aug 2017
- Location
- Canberra
- Posts
- 587
does anyone have an opinion on the sawtooth ones?
-
13th February 2020, 11:29 PM #7
-
14th February 2020, 08:01 AM #8Senior Member
- Join Date
- Aug 2014
- Location
- Geelong, Victoria
- Posts
- 284
Think carefully about what sort of work you want to do. The cheaper sets from Carbatec for example are not that good if you move away from softer woods and cross grain work. I have read that sawtooth bits are better in end grain and the carbide bits I had from a now defunct woodturner are also great in end grain but not as clean a cut in softer side grain.
Rule of thumb - buy as good as you can afford.
-
14th February 2020, 03:37 PM #9SENIOR MEMBER
- Join Date
- Aug 2017
- Location
- Canberra
- Posts
- 587
-
8th September 2020, 06:27 PM #10GOLD MEMBER
- Join Date
- May 2012
- Location
- Melb
- Posts
- 1,544
I've been using a sawtooth set for many years now, and have never been really happy as they blunt and burn the wood really easy, and always had to constantly touch them up which I just found to be a pain.
I recently got some carbide tipped ones from CarbiTool that cut through Blackbutt like a hot knife in butter, prices were very low and the shipping was free.
The only downside with the CarbiTool ones is they come with a reduced small hex shank, I'd far prefer if they were 1/2" shank instead.
I also just got some big beasties from McJing for Fathers Day, including an 80mm one for clock inserts, holy cow what a monster, nice thick 160mm long shank, cuts like a dream in hardwood! Well worth the money I reckon!
Lets Make Time in QLD also have short shank carbide forstners very cheap:
Let's Make Time - Drill Bit 80mmTungsten
-
8th September 2020, 11:58 PM #11
I have Colt forstners, which is excellent. On a different tack, have you considered a hole saw? I purchased a Lenox bimetal set from Bunnings on the weekend, and they are terrific. May be a lot cheaper in the 70mm size.
Regards from Perth
DerekVisit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.
-
9th September 2020, 09:16 AM #12GOLD MEMBER
- Join Date
- May 2012
- Location
- Melb
- Posts
- 1,544
I've got a couple of good bi-metal holesaw kits, and they are great, but they don't leave as clean a hole as I'd like, although that was likely the crappy drill presses I had prior.
Most of the holes I need to do are blind holes anyway so the carbide forstners are just perfect for me now. I'll never be using HSS forstners again now.
Now I finally have a decent drill press that doesn't wander or have the chuck fall out I can get perfectly clean and straight holes.
cheers, Ian
-
9th September 2020, 09:28 AM #13.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,790
My saw toothed Forstener set is from CT and have had it for almost 15 years. The main thing I drill with them is Al and have not touched them up yet although the 19 and 25 mm sizes could probably do with it.
To more easily drill larger sizes (>32) I sometimes drill relieving holes inside the area being removed as shown below.
This makes a big difference in sawdust removal, and if your DP is underpowered or you are using a hand held drill.
I do the same with hole saws - in this case the relief holes have to just touch the side of the circle being cut by the saw.
Screen Shot 2020-09-09 at 6.19.46 am.png
A is for holes withe either a Forstner or hole saw , B is for hole saws when you want to keep the inside circle as one piece .
Even a single 1/4" relief hole makes a big difference with hole saws.
I find 2 x 1/4" relief holes results in not needing to withdraw the saw from the hole to clear sawdust.
-
9th September 2020, 08:18 PM #14SENIOR MEMBER
- Join Date
- Aug 2017
- Location
- Canberra
- Posts
- 587
Would that be the same as starting small and going up in sizes till the hole is the size you want?
-
9th September 2020, 09:17 PM #15.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,790
Similar Threads
-
Forstner Bits Set.
By planemaker in forum HAND TOOLS - POWEREDReplies: 31Last Post: 14th October 2015, 09:32 PM -
Forstner Bits
By joe greiner in forum HAND TOOLS - POWEREDReplies: 1Last Post: 25th January 2007, 10:04 AM -
Forstner Bits
By Ditty in forum WOODWORK - GENERALReplies: 12Last Post: 29th October 2003, 02:36 PM