Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 11 of 11
Thread: Fruit bowls
-
13th October 2014, 12:47 AM #1
Fruit bowls
I thought I needed some largish but shallow fruit bowls so spent the last couple of day trying to make three of them, well one of them ended up in the bin as it was just too punky which is a shame as it would have been nice to save(I tried all the usual trick but with no joy).
At least I got two bowl one of Oak and the other is Beech
The Oak one is 10 1/2" X 2 1/2" finished with melamine lacquer and the Beech one is 10" X 2 1/2" and finished again with Melamine lacquer
-
13th October 2014 12:47 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
13th October 2014, 07:20 AM #2
Both are good looking, I love the insert in the Beech
Pat
Work is a necessary evil to be avoided. Mark Twain
-
13th October 2014, 11:02 AM #3
Punky wood shouldn't have been a problem it usually is just a problem of ensuring it is stabilised properly. You can use very thin CA, not cheap stuff, soak the area and leave for at least a few days to dry (takes a while at depth).
Neil____________________________________________Every day presents an opportunity to learn something new
-
13th October 2014, 08:05 PM #4
-
13th October 2014, 09:01 PM #5
Nice work on both
what is that insert? it looks spectacularregards
Nick
veni, vidi, tornavi
Without wood it's just ...
-
13th October 2014, 10:47 PM #6
The insert is copper cut to round then heated and softened then beaten with a ball pain hammer. flattened out and checked for round, finally a light polish so as to catch only the high spots before inserting into the bowl. Care has to be taken when applying any finish otherwise a dark stain can get onto the wood even though the bowl had sander sealer applied before cutting the recess.
-
13th October 2014, 10:57 PM #7SENIOR MEMBER
- Join Date
- Jul 2014
- Location
- Gold Coast Australia
- Age
- 67
- Posts
- 519
Ok I'll ask for those that don't know, what is punky wood?
-
14th October 2014, 01:16 AM #8
Very soft areas in the wood normally associated with rot. When a piece of wood spalts it is the start of decay and is still hard but shows the lines you see it after this it starts to become soft if not too much has become soft you can stabilise it as dai sensei says by using thin CA glue or if not too bad sander sealer.
The piece on the left is fine the piece on the right has some punky wood in it on the left of the blank the very light area, this one however has not gone past the saving stage
2014-10-13 001 001.jpg
-
14th October 2014, 02:28 PM #9
The Oak to me is more appealing.
And I am in agreement with you we need to eat more fruit and vegetables.
-
14th October 2014, 07:23 PM #10
-
15th October 2014, 06:08 AM #11
Thank you both.
The 2 blanks I have used as an example are in my wood pile to be turned into bowls or something have not yet decided. They will have to wait so many things still to make like bandsawn boxes for Christmas presents, also bangles and pendants which I have just been given an order for or should that be ordered to make by my other halve. And I want to get back to making some toys which keeps getting pushed further back on the to complete list
Similar Threads
-
Wooden fruit bowl with wooden fruit
By Wilco Flier in forum WOODTURNING - GENERALReplies: 10Last Post: 15th July 2011, 07:37 PM -
First fruit
By bowerbird in forum WOODTURNING - GENERALReplies: 4Last Post: 7th October 2010, 07:34 AM -
What finish is safe for fruit bowls etc
By munruben in forum WOODTURNING - GENERALReplies: 8Last Post: 4th January 2009, 02:38 PM -
Where to go fruit picking?
By silentC in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 16Last Post: 1st May 2007, 05:56 PM -
Owl & Fruit
By Bob H in forum INTARSIAReplies: 6Last Post: 21st August 2006, 10:16 AM