Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
-
19th March 2016, 01:18 PM #1GOLD MEMBER
- Join Date
- Sep 2008
- Location
- North Carolina, USA
- Posts
- 2,327
Glue And Finish Greasy Sticky Softwood
Last fall I bought a piece of spruce? with spectacular figure, reddish and cream growth rings, about 40 to the inch. I put it on the front porch. Today I noticed a crack, so stuck it on the lathe and roughed out a bowl. It is greasy, resiny, sticky. I put CA in the crack and wrapped it with tape around the rim.
Will CA stick on this kind of timber? Any suggestions for what will stick? What can I use to finish it? I usually use Tung Oil, cut with solvent.
Thanks for any comments.So much timber, so little time.
Paul
-
19th March 2016 01:18 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
19th March 2016, 08:03 PM #2
Hmm we dont seen much if any of this stuff. But we have Tallow wood https://en.wikipedia.org/wiki/Eucalyptus_microcorys and here might be of some help
http://www.timber.net.au/images/down..._the_floor.pdf
and theres an old thread about glueing Tallowood.
Gluing Tallow wood
hope this helps PaulInspiration exists, but it has to find you working. — Pablo Picasso
-
19th March 2016, 09:02 PM #3
Yes Thin CA helps as it penetrates to the bottom of the crack. Unfortunately though, usually another crack opens up nearby, the stresses don't go
Neil____________________________________________Every day presents an opportunity to learn something new
Similar Threads
-
Outdoor table, best finish and best way to glue up the top?
By StevenManos in forum WOODWORK - GENERALReplies: 3Last Post: 27th July 2014, 04:47 PM -
Remove sticky glue residue
By garfield in forum WOODWORK - GENERALReplies: 4Last Post: 8th March 2013, 10:44 AM -
Chisel softwood
By Bin57again in forum WOODCARVING AND SCULPTUREReplies: 4Last Post: 16th April 2011, 10:04 AM -
softwood for single bed?
By s_m in forum TIMBERReplies: 8Last Post: 26th February 2007, 05:24 PM -
Finish before glue up?
By LineLefty in forum GLUEReplies: 7Last Post: 4th April 2005, 05:28 PM