Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 10 of 10
Thread: Gluing Plywood
-
28th January 2011, 09:55 PM #1Intermediate Member
- Join Date
- Jan 2010
- Location
- Perth, WA
- Posts
- 37
Gluing Plywood
Hello All,
I have come across a couple of projects in some recent magazines which involve the laminating of plywood to give a usable blank.
The glues they recommend aren't available (as far as i know) in Western Australia.
Does anybody out there have any recommendations as to what glues I could use.
I have "Titebond 2" & "Liquid Nails" in the shed.
Cheers
Grant
(Hot & Humid with a Tropical Cyclone hovering on the horizon!)
-
28th January 2011 09:55 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
28th January 2011, 10:40 PM #2
What size is the ply and how thick? and what are you making?
-
28th January 2011, 10:55 PM #3Intermediate Member
- Join Date
- Jan 2010
- Location
- Perth, WA
- Posts
- 37
Claw Hama,
I bought some 18mm thick Marine ply which needs cutting into 210mm long X 300mm to 100mm wide pieces to make a laminated blank- 17 pieces total.
It is actually a project in Woodturning magazine # 221.
The intention is, with variations that it will be a hollwform\vase shaped vessel.
Each piece is glued to the face of the preceding\following piece until the laminated blank is achieved.
And then the fun starts- the author did recommend a GOOD glue.
Cheers
Grant
Still Very Humid
-
28th January 2011, 11:00 PM #4
There ain't nuthin wrong with Titebond for this job. I wouldn't use Liq Nails
-
28th January 2011, 11:04 PM #5
Well your in luck, I would say Titebond II is a good glue and should do that job as good as any on the market. How old is it? Shelf life of most is only about a year so get some fresh if its much older than that. Have fun
Been rediculous here too, 90ish% and 30-40C for the last week. Making work very uncomfortable.
-
28th January 2011, 11:15 PM #6Intermediate Member
- Join Date
- Jan 2010
- Location
- Perth, WA
- Posts
- 37
Cheers guys for the prompt replies.
Will go & buy some fresh Titebond as didn't realise that it had a shelf life.
All the best
Grant
Absolute Sweat Ball- warmest night for the Year last night- 50% humidity & 26.6 minimum at 2:30 am- worse expected tonight- at least we're dry unlike the poor Buggers over east!
-
29th January 2011, 12:40 PM #7
...adding my 2 cents worth - Titebond for sure - it's an excellent glue.
Cheers,
Ed
Do something that is stupid and fun today, then run like hell !!!
-
29th January 2011, 04:38 PM #8GOLD MEMBER
- Join Date
- Jun 2006
- Location
- Burwood NSW
- Age
- 82
- Posts
- 1,247
Grant
I have wondered about this too .The glue used in marine ply is black . I am not sure what colour titebond 2 drys. I only have 1 and 3 . You may need to consider if you want a colour change at each laminate .
Ted
-
29th January 2011, 09:03 PM #9
I can't add to the advice above
but would like to see piccies as you goregards
Nick
veni, vidi, tornavi
Without wood it's just ...
-
30th January 2011, 12:11 AM #10
Dark Glue
I have yet to try it, but Titebond II (2) is available in a dark formulation - part # 3704. I don't know how dark it is, but it might simulate the dark glue within the plywood better than ordinary Titebond or carpenter's glue. If you laminate the plywood sheets with face grains perpendicular to each other, the appearance might be as a single huge assembly. With yellow glue, and/or face grains parallel, it wouldn't have that effect. BTDT.
Cheers,
JoeOf course truth is stranger than fiction.
Fiction has to make sense. - Mark Twain
Similar Threads
-
Plywood vs Marine plywood
By Jonnyiswalking in forum FURNITURE, JOINERY, CABINETMAKING - formerly BIG STUFFReplies: 9Last Post: 13th November 2009, 09:57 PM -
Plywood Sales split from Mr Plywood
By Razgo in forum BOAT BUILDING / REPAIRINGReplies: 14Last Post: 9th November 2009, 12:32 PM -
Marine Plywood vs Baltic Birch Plywood
By bateau in forum BOAT RESOURCES / PRODUCT SEARCHReplies: 7Last Post: 9th July 2008, 02:58 PM -
gluing red gum
By benswoodwork in forum WOODWORK - GENERALReplies: 4Last Post: 4th December 2006, 03:33 PM