Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 21
Thread: gluing steel rods in wood.
-
11th April 2011, 05:50 PM #1
gluing steel rods in wood.
On request I've been asked every so kindly to make a rolling pin with bearings.
in anycase my concern is what glue to use to lock up steel hardware in wood.
.........got steel rod going into a handle...(1st pic of an experiment) Tight hammer fit. I don't want the rod spinning (and hoping glue will be enough that I don't have to pin it somehow) ...wondering what glue....epoxy ?
and got bearings going into the main body.(2nd pic).....Definetly thinking epoxy will work here cause I can see it going off spilling around the bearings locking it up, so the bearings won't (shouldn't fingers crossed) come out.
the bearings won't slip on the rod because I'm using a loctite product. Already tried taking one off and happy with it. Wrecked a bearing trying to get it off.
Just the rod in the handle I'm wondering about. ? Don't want it to ever come out.
appreciate any thoughts
ta
Jake
-
11th April 2011 05:50 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
11th April 2011, 06:17 PM #2
Jake, If you roughen the rod to give the epoxy something to grip to you will have no problems. When I have joined a handle to a walking stick, I used a thick super glue, slow drying , plenty of time to get it lined up and cramped.
regards NF
-
11th April 2011, 06:23 PM #3
Cording to this bloke, this stuff is the Ducks Coconuts -
https://www.woodworkforums.com/f221/m...tralia-133837/
-
11th April 2011, 07:08 PM #4
-
11th April 2011, 07:29 PM #5
G'Day Jake,
You might be able to "knurl" the rod at the position for the bearing to give you an interference fit.
Cheers, Crowie
-
11th April 2011, 08:21 PM #6Been here a while
- Join Date
- Feb 2004
- Location
- Victoria
- Posts
- 345
Also consider cutting some thin slices into the end of the rod to make barbs like a fishing hook. Use a thin hacksaw, and bend them out with a screwdriver. The rod will go in okay, but it'll never come out. The harder you pull, the deeper they dig in.
-
12th April 2011, 04:22 AM #7GOLD MEMBER
- Join Date
- Sep 2008
- Location
- North Carolina, USA
- Posts
- 2,327
I agree with the above, scratching the rod with 50 or 60 grit sandpaper and epoxy.
So much timber, so little time.
Paul
-
12th April 2011, 05:38 AM #8
Polyurethane glue will also do a good job. I use it for Stainless rods in spotted gum regularly. Pretty good working time too.
-
12th April 2011, 05:40 AM #9
-
12th April 2011, 06:58 AM #10
-
12th April 2011, 07:07 AM #11
thanks for the thoughts.
think what I might do is buy grade 8.8 bolts and use it as the shaft. And put the thread end into the handle. Plenty of places for the epoxy to grip onto there.
ta.
-
12th April 2011, 08:01 AM #12Retired
- Join Date
- May 1999
- Location
- Tooradin,Victoria,Australia
- Age
- 73
- Posts
- 11,918
I don't think they need to be high tensile, ordinary ones will do.
-
12th April 2011, 08:21 AM #13
So what are we gonna roll here? Bitumen?
-
12th April 2011, 08:23 AM #14
-
12th April 2011, 08:55 AM #15Retired
- Join Date
- May 1999
- Location
- Tooradin,Victoria,Australia
- Age
- 73
- Posts
- 11,918
Huh?
Similar Threads
-
Align wood grain before gluing
By Dengue in forum WOODWORK - GENERALReplies: 20Last Post: 26th November 2009, 07:18 AM -
Question On Welding Rods and RHS Steel
By mattwolf in forum WELDINGReplies: 1Last Post: 29th July 2009, 10:11 PM -
LOOK HERE You Won't Be Sorry Wood Hot Rods
By AUSSIE in forum TOY MAKINGReplies: 11Last Post: 26th July 2009, 06:39 PM -
wood and steel
By scoey in forum WOODWORK - GENERALReplies: 5Last Post: 5th August 2007, 10:09 PM -
Gluing wood for turning
By R12chard in forum WOODTURNING - GENERALReplies: 3Last Post: 10th April 2005, 05:51 AM